|
Cool - good to know.
|
I've sent this question to support a Tekin but thought I would ask the experts here while I wait for a reply.
What is the default 'Timing' setting on the Gen3 for a Tekin HDpro4 4300 (17/40 grear) and the HD 4600 (16/40) on my Tekno SCT410.3? I was once told to use either Custom 1 or Custom 2 for a 4-pole motor. Thanks |
Originally Posted by lowspark
(Post 15246728)
I've sent this question to support a Tekin but thought I would ask the experts here while I wait for a reply.
What is the default 'Timing' setting on the Gen3 for a Tekin HDpro4 4300 (17/40 grear) and the HD 4600 (16/40) on my Tekno SCT410.3? I was once told to use either Custom 1 or Custom 2 for a 4-pole motor. Thanks |
Thank you
|
Randy, just to confirm you meant either Custom 1 or Custom 2 settings? Pick one and no need to adjust the timing or boost settings in the custom settings?
|
I'd honestly just run the default timing profile #1 or #2. They're close to C1 and C2 and you can hot swap between them if you want to feel the difference.
|
Got it.. thanks
|
No turbo in ver272
https://cimg7.ibsrv.net/gimg/www.rct...1f973c97a.jpeg https://cimg8.ibsrv.net/gimg/www.rct...359af18be.jpeg Hi I just purchased a Tekin Rx8 gen3 and a bluetooth hotwire, I updated the hotwire and speedo, and with the software the new brake features appear, but I still dont have any turbo settings, neither on the computer or the App. |
Originally Posted by jeppesen
(Post 15254464)
Hi I just purchased a Tekin Rx8 gen3 and a bluetooth hotwire, I updated the hotwire and speedo, and with the software the new brake features appear, but I still dont have any turbo settings, neither on the computer or the App. |
https://cimg5.ibsrv.net/gimg/www.rct...f0a69b533.jpeg Thats very disappointing, as the materiel on your webpage gives a different information. |
Originally Posted by jeppesen
(Post 15254847)
https://cimg5.ibsrv.net/gimg/www.rct...f0a69b533.jpeg Thats very disappointing, as the materiel on your webpage gives a different information. We don't need to boost or add turbo to most any car application the Rx8 is used in. What are you using it in that you feel needs this feature? |
I’m racing 1/8 eGT with spec motors. |
Originally Posted by jeppesen
(Post 15255315)
I’m racing 1/8 eGT with spec motors. |
When will there be a speed controller and motor developped specifically for 1/8 on road cars ? Current speed controllers for 1/8 are very limited in setup options compared to 1/10 speed controllers for touring cars. Also the 1/8 motors are still a fully closed design whereas 1/10 motors are more and more having vent openings to exit heat. Seems like 1/8 speed controllers and motors have been standing still for many years and in 1/8 on road they are a limiting factor for performance today. |
Really need a 1900kv combo... Hopefully they come back in stock soon. Any body know if the combo will be including the new gen 3 motors sometime? http://www.teamtekin.com/t8.html |
| All times are GMT -7. It is currently 11:54 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.