![]() |
Help me choose
Older Tekin RS Gen II + Older Reedy 17.5t
or Turnigy Trackstar 17.5t Brushless + 80a ESC |
I would go tekin+reedy.
|
Absolutely.... Tekin/Reedy. Without hesitation compared with Turnigy.
|
Well, hell - guess I'll switch.
|
How much for each system? I have had excellent results running the Trackstar motors and currently have two 21.5 V1, one 17.5 Outlaw and one 7.5 V1 and all are very strong runners.
I also have a Turnigy 80A red sensored brushless ESC in my Losi buggy. Works great, just a bit on the large size. |
Originally Posted by SteveM
(Post 14793809)
How much for each system? I have had excellent results running the Trackstar motors and currently have two 21.5 V1, one 17.5 Outlaw and one 7.5 V1 and all are very strong runners.
I also have a Turnigy 80A red sensored brushless ESC in my Losi buggy. Works great, just a bit on the large size. The 80a Turnigy combo is currently installed (was bought new, maybe 2yrs old). The Tekin/Reedy (purchased used) was in my old RM buggy. Both systems are functional. I'll tell ya - my single beef with the Tekin is the overly-expensive program card and the non-spec JR 3-pin data connection. I am not paying more than $20.00 for a program card and it kinda chaps my hide that I need to shave down a plastic housing, just to get a JR-female to fit. |
Originally Posted by loaba
(Post 14793848)
I have both, right now.
The 80a Turnigy combo is currently installed (was bought new, maybe 2yrs old). The Tekin/Reedy (purchased used) was in my old RM buggy. Both systems are functional. I'll tell ya - my single beef with the Tekin is the overly-expensive program card and the non-spec JR 3-pin data connection. I am not paying more than $20.00 for a program card and it kinda chaps my hide that I need to shave down a plastic housing, just to get a JR-female to fit. |
Originally Posted by Andy Koback
(Post 14793892)
Tekin has a program card??? :confused: Never heard of/saw one.
Anyway, I have a solution. I've got a USB-to-JR male adapter. I just need to make my own JR female jumper cable (shave one of the ends to fit.) |
| All times are GMT -7. It is currently 12:10 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.