|
Originally Posted by waffleNchicken
(Post 14682969)
PS. Tekin now suggest all rx8 owners uses kyosho gel tape to help reduce tekin concussions.
I directly bolt my ESC's to the chassis. In my Tekno's they're bolted to the ESC plate, no tape. There are 3 mounting screws on the bottom of the Rx8 where we supply 3 small silver screws for mounting the ESC to items like this. |
Originally Posted by Randy_Pike
(Post 14683344)
This isn't accurate. Sure you can use it, but it's not an official recommendation from us.
|
Tekin not heavy-duty
Originally Posted by waffleNchicken
(Post 14683846)
My bad Randy. This was the information that trickled down to me. I was misinformed. Thanks for the correction.
|
The Kyosho zeal gel tape will dampen vibration. It won't do jack for dampening shock.
Go ahead, push down on the ESC, that tape is firm as heck. You can remove the center of the tape to make it softer, but then it won't stick to anything well, so you'll have to CA glue the tape down. |
Originally Posted by noddy2
(Post 14682907)
They come with a mounting plate and screws ,but when fitted to the sc leaves a @7mm gap.ie gets higher ,i cut mine down just leaving a gap to slide cable ties through, and also under the stock7 mount ,and fitted 1/4 rubber in-between. Ps the hobbywing doesn't seem to be troubled by concussions as much as tekin !
I did the Kyosho zeal stuff. I guess I'll see how it goes! |
| All times are GMT -7. It is currently 01:41 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.