R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   Charging a 3s Controller battery. Help (https://www.rctech.net/forum/radio-electronics/962332-charging-3s-controller-battery-help.html)

Miko1976 09-19-2016 04:25 AM
Charging a 3s Controller battery. Help
 
I just bought an Airtronics M11. Came with a 3s, 2500 Mah Lipo. I cant charge it as every time I try the charger says I have a broken connection. I can only plug in the lead to the balance board. Doesn't seen to be a way to get power into the battery.

I was told to plug in the thicker lead to the balance board to charge. Didn't work. How can I charge this battery? Any suggestions?

Thanks in advance!!

Battery is Turnigy 3s Lipo, 2500mah 5c.

Roelof 09-19-2016 06:58 AM
Take out the battery, there should be a balance connector and a power connector.

Andy Koback 09-19-2016 08:12 AM
Originally Posted by Miko1976 (Post 14675428)
I just bought an Airtronics M11. Came with a 3s, 2500 Mah Lipo. I cant charge it as every time I try the charger says I have a broken connection. I can only plug in the lead to the balance board. Doesn't seen to be a way to get power into the battery.

I was told to plug in the thicker lead to the balance board to charge. Didn't work. How can I charge this battery? Any suggestions?

Thanks in advance!!

Battery is Turnigy 3s Lipo, 2500mah 5c.
Like stated above, remove battery from radio and then the power connector goes to the charger and balance board to small balance connector. Charge at 1C. (2.5 amps)


All times are GMT -7. It is currently 02:21 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.