Originally Posted by DamageNZ (Post 14677950)

Hey Randy - Below are my current settings:

Drag Brake Off
Brake Minimum 0
Active Brake 0
Brake Strength 100
Push Control 0
Brake Frequency 6101

Throttle Min 18
Neutral Width 12
Reverse Speed 100
Throttle Frequency 2007
Reverse Delay 0.76
Torque 10
Timing Profile 1 - Spec Stock

21.5t Fantom FR1 Motor running 35deg end bell timing

The only thing I have changed is the Tekin update, like I said the car just seems low on punch/power. Any advice would be greatly appreciated!

Cheers,

Originally Posted by SickNT760 (Post 14694988)

Honestly I do not know how to set my brake frequency or how to even look at it. I have re calibrated my radio and ESC. Is the brake frequency done through the radio or is it something that I need the hotwire for? If the case is with hotwire I can order one and check to see if that may lead me to any further improvements.

Originally Posted by JAE (Post 14694991)

Randy Pike - Can you provide your setup similar to below for 17.5 stock buggy? I find the setup sheets don't have all the detail like below

Originally Posted by Randy_Pike (Post 14698563)

Drag Brake Off
Brake Minimum 0
Active Brake 0
Brake Strength 100
Push Control 0
Brake Frequency 6000

Throttle Min 15
Neutral Width 5
Reverse Speed 100
Throttle Frequency 4000
Reverse Delay n/a
Torque 10
Timing Profile 1 - Spec Stock

Here you go

Originally Posted by jason07 (Post 14710794)

I just received an android tablet from work but I don't have it right this second. (or the hotwire)

What cable do I need to hook the 2 together? Mini USB to Micro USB cable?

Originally Posted by NOFX (Post 14709860)

Hi guys

Sorry if this has been covered and i've missed it but i I've got original tekin RS escs and a tekin B1. Firstly will v255 software work on them and secondly do the functions such as drive frequency work when the rs is running in brushed mode and on the b1?

Cheers