Tekin rx8 gen 2 and pro 4 hd 4300 question
#1
Tekin rx8 gen 2 and pro 4 hd 4300 question
I installed a rx8 gen 2 and pro 4 hd 4300 in my traxxas now back slash weight 5.8lbs with battery.
Im only running 2s lipo. My question is can some one point me in the right direction fro gearing im at 14/54 32p. I run indoor tracks not race yet just don't want the motor or esc to get to hot. And what kind of settings should i be doing to the rx8?
Im only running 2s lipo. My question is can some one point me in the right direction fro gearing im at 14/54 32p. I run indoor tracks not race yet just don't want the motor or esc to get to hot. And what kind of settings should i be doing to the rx8?
#2
Tech Legend
iTrader: (294)
I would suggest ask someone with a similar electronics setup what they gear at.
From there, use a common rc speed calculator and determine what estimated top speed their vehicle is acheiving. I would then gear my vehicle to reach that same theorectical speed. that can give you a nice place to start, especially on small tracks.
From there, monitor temps.
From there, use a common rc speed calculator and determine what estimated top speed their vehicle is acheiving. I would then gear my vehicle to reach that same theorectical speed. that can give you a nice place to start, especially on small tracks.
From there, monitor temps.
#3
TTT