R/C Tech Forums - motor stall

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - motor stall (https://www.rctech.net/forum/radio-electronics/902487-motor-stall.html)

Rcracing01

12-06-2015 06:18 PM

motor stall

Hello all,

Ive been out of the hobby for awhile and just got back in. Running a sakura XI and when I have the car on a stand and press the throttle the motor hesitates for a second. It almost sounds like it runs at half RPM for a second then goes full. I am running a Speed passion GT2.0 in blinky mode with a Kill Shot 17.5 motor.

Any ideas?

sakadachi

12-07-2015 11:11 AM

Is that a sensored brushless? If so, makes sure the sensor wire it is connected.

Change the 'punch' value on your ESC if it offers adjustment.

Rcracing01

12-07-2015 04:46 PM

Yes it's a sensored brushless and the wire looks like it's in snug on both ends
And the esc unfortunately doesn't have that option

3D-Seth

12-07-2015 05:15 PM

Sounds like the ESC has turbo or something built in...

Geezatec

12-07-2015 07:49 PM

Sitting a while? Remove sensor cable, use contact cleaner on connectors. Recalibrate the ESC. Try again.

NOS1K

12-08-2015 06:41 AM

Sensor wire or some odd setting in ESC or radio

All times are GMT -7. It is currently 01:21 PM.