Guy's I did this and it makes the trigger feel 100 times smoother and nice you have to try it for sure!

See my radios behind there triggers I put a section of very aerated foam with a stick backing the length of the trigger where it would normally hit the back plastic and what it does is when you pull the trigger back it makes no noise and it feels like butter smooth much better.

without the foam you get a plastic to plastic slap feeling.

I used a stick foam that is airy and collapses easy when smashed down and is very thin when fully collapsed.

reason why I tried this is because I have a camera I mount on my radio to make videos and I heard the trigger slapping sound...but the trigger feels so much better like this I thought I would share it with all.

Try it.

Does this limit the travel of the trigger at all?

Hi not really if you get the foam that is aerated a lot and has the paper thin stick backing like I used in the photos it completely compresses to very thin material.

Thanks I'll hafta look around and see what I have.

I will look into this for my basher rig radio. I don't seem to have the problem you described with my MT4, but I totally do with my KT200.