Community
Wiki Posts
Search

Lipo Discharging.

Thread Tools
 
Search this Thread
 
Old 01-08-2015 | 07:51 AM
  #1  
Thread Starter
Tech Regular
 
Joined: Nov 2014
Posts: 432
Default Lipo Discharging.

I have recently bought some new Lipos and was wondering if there is an advantage to discharging them down to 3.0v. After any race meeting I have been to my lipos always come out of the car above the storage voltage of 3.85 so my charger/discharger discharges to put them in a state of storage. So they are always between charged and storage.I was wondering if there is an advantage to discharging further?
Piles is offline  
Old 01-08-2015 | 08:00 AM
  #2  
timannnn6's Avatar
Tech Elite
iTrader: (140)
 
Joined: Jul 2010
Posts: 2,285
Default

Originally Posted by Piles
I have recently bought some new Lipos and was wondering if there is an advantage to discharging them down to 3.0v. After any race meeting I have been to my lipos always come out of the car above the storage voltage of 3.85 so my charger/discharger discharges to put them in a state of storage. So they are always between charged and storage.I was wondering if there is an advantage to discharging further?
No advantage. You're doing it right. When not in use, always storage charge them. Been doing this for years and have never had a lipo issue.
timannnn6 is offline  
Old 01-08-2015 | 08:01 AM
  #3  
racer1812's Avatar
Super Moderator
iTrader: (31)
 
Joined: Nov 2008
Posts: 15,743
From: RIP 'Chopper', 4/18/13 miss you bud:(
Default

Originally Posted by Piles
I have recently bought some new Lipos and was wondering if there is an advantage to discharging them down to 3.0v. After any race meeting I have been to my lipos always come out of the car above the storage voltage of 3.85 so my charger/discharger discharges to put them in a state of storage. So they are always between charged and storage.I was wondering if there is an advantage to discharging further?
What voltage are they coming off the track at? If they're under 4v/cell I wouldn't worry about it. IMO

3v/cell is too low for a storage charge. No reason to go that low.

(and I'm moving this thread)
racer1812 is offline  
Old 01-08-2015 | 08:09 AM
  #4  
skeasor's Avatar
Tech Master
 
Joined: Mar 2012
Posts: 1,089
From: usa
Default

I don't discharge mine after the race day is over. I know that mine are usually about 3.8 when I'm done so I just leave them there. I don't think I'd go down to 3.0...That seems pretty low.
skeasor is offline  
Old 01-08-2015 | 09:34 AM
  #5  
Thread Starter
Tech Regular
 
Joined: Nov 2014
Posts: 432
Default

Sorry Guys, I meant is it neccessary to discharge lower than storage voltage occaisionally to maintain punch or maintain capacity?
Piles is offline  
Old 01-11-2015 | 01:12 PM
  #6  
Tech Adept
iTrader: (7)
 
Joined: Oct 2004
Posts: 176
Default

Agree. As long as you are between 3.6 and 3.9, I leave mine alone.
kevinsreell is offline  
Old 01-11-2015 | 08:14 PM
  #7  
GerryH's Avatar
Tech Fanatic
iTrader: (29)
 
Joined: Nov 2009
Posts: 978
Default

I believe the thinking is that a lower voltage would decrease loss of capacity over a long period of storage time (years), but the risk of self discharge and permanent damage results in a best practice of 40-50% full.

The only other thing you can do is store them some place cool. I know some people store them in freezers, but you have to allow ample time for the batteries to warm up before using them and in my opinion it's too much effort to a minor capacity savings.

As everyone else has said, you're following best practices.
GerryH is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.