Which servo?
#1
Which servo?
Which servo do you think best?I buy a short course today,wanna to buy a new servo.Hope can give me some advice.
#2
Tech Adept
Can u specify your understanding of best. There are some high end servo brands like futaba, ko, hitec, savox, radiopost, protek, expert and so on. Each one of them has its own advantages over other servo brands generally. But i can say i bought xpert si-4431 servo recently. And u can bought it from amain with discount coupon. It costs 65 usd. Its an brushless servo and its specs are 0.08sec/60degrees and 17.5 kg.cm which are good specs for both 4wd sct and 1:8 buggy. And i think its one of the best cheapest high end servo
Last edited by murat61; 10-24-2014 at 08:56 AM. Reason: sorry i fixed servo model
#3
sounds good~can you PM me the website
?And I heard a servox brand
of power star.Do you know?
?And I heard a servox brand
of power star.Do you know?
Can u specify your understanding of best. There are some high end servo brands like futaba, ko, hitec, savox, radiopost, protek, expert and so on. Each one of them has its own advantages over other servo brands generally. But i can say i bought xpert si-4431 servo recently. And u can bought it from amain with discount coupon. It costs 65 usd. Its an brushless servo and its specs are 0.08sec/60degrees and 17.5 kg.cm which are good specs for both 4wd sct and 1:8 buggy. And i think its one of the best cheapest high end servo
#4
Tech Adept
I heard savox servo.but I don't heard power star
#5
Tech Adept
http://www.amain.com/Xpert-4000-Seri...-Servo/p276593
this the link for xpert servo. I have savox 1258, 1256 and 2274 as well. 2274 is the best by far. Here are specs for each above. Savox brushless servos was 20 dollars more expensive about 2 months ago or so. They dropped the price and amain changed discount policy. Therefore, i was able to buy 2274 for 83 dollars instead of 110 dollars. Highly recommended servo which TY tessmann uses. 1258 is fast servo but you dont wanna put 12kg torque servo in your +3000gr rc car. 1267 is one of the most preffered servo for 1/8 scale models. I suggest it if you have an esc supports 7.4v or an external bec. Also, 2274 is an brushless servo which has longer life cycle and draw less amp compared to coreless motor.
savox sb 2274sg
Speed:
@7.4V: .08 sec/60
@6.0V: .105 sec/60
Torque:
@7.4V: 347.2 oz-in
@6.0V: 277.7 oz-in
savox sa 1258tg (not high voltage servo)
Speed(@6.0V sec/60): .08
Torque(@6.0V oz-in): 166.6
savox sc 1267mg
Torque: @7.4v - 277.7 oz-in / 21 kg-cm
Speed: @7.4v - 0.09 sec/60°
this the link for xpert servo. I have savox 1258, 1256 and 2274 as well. 2274 is the best by far. Here are specs for each above. Savox brushless servos was 20 dollars more expensive about 2 months ago or so. They dropped the price and amain changed discount policy. Therefore, i was able to buy 2274 for 83 dollars instead of 110 dollars. Highly recommended servo which TY tessmann uses. 1258 is fast servo but you dont wanna put 12kg torque servo in your +3000gr rc car. 1267 is one of the most preffered servo for 1/8 scale models. I suggest it if you have an esc supports 7.4v or an external bec. Also, 2274 is an brushless servo which has longer life cycle and draw less amp compared to coreless motor.
savox sb 2274sg
Speed:
@7.4V: .08 sec/60
@6.0V: .105 sec/60
Torque:
@7.4V: 347.2 oz-in
@6.0V: 277.7 oz-in
savox sa 1258tg (not high voltage servo)
Speed(@6.0V sec/60): .08
Torque(@6.0V oz-in): 166.6
savox sc 1267mg
Torque: @7.4v - 277.7 oz-in / 21 kg-cm
Speed: @7.4v - 0.09 sec/60°
#6
Tech Apprentice
iTrader: (6)
http://www.amain.com/Xpert-4000-Seri...-Servo/p276593
this the link for xpert servo. I have savox 1258, 1256 and 2274 as well. 2274 is the best by far. Here are specs for each above. Savox brushless servos was 20 dollars more expensive about 2 months ago or so. They dropped the price and amain changed discount policy. Therefore, i was able to buy 2274 for 83 dollars instead of 110 dollars. Highly recommended servo which TY tessmann uses. 1258 is fast servo but you dont wanna put 12kg torque servo in your +3000gr rc car. 1267 is one of the most preffered servo for 1/8 scale models. I suggest it if you have an esc supports 7.4v or an external bec. Also, 2274 is an brushless servo which has longer life cycle and draw less amp compared to coreless motor.
savox sb 2274sg
Speed:
@7.4V: .08 sec/60
@6.0V: .105 sec/60
Torque:
@7.4V: 347.2 oz-in
@6.0V: 277.7 oz-in
savox sa 1258tg (not high voltage servo)
Speed(@6.0V sec/60): .08
Torque(@6.0V oz-in): 166.6
savox sc 1267mg
Torque: @7.4v - 277.7 oz-in / 21 kg-cm
Speed: @7.4v - 0.09 sec/60°
this the link for xpert servo. I have savox 1258, 1256 and 2274 as well. 2274 is the best by far. Here are specs for each above. Savox brushless servos was 20 dollars more expensive about 2 months ago or so. They dropped the price and amain changed discount policy. Therefore, i was able to buy 2274 for 83 dollars instead of 110 dollars. Highly recommended servo which TY tessmann uses. 1258 is fast servo but you dont wanna put 12kg torque servo in your +3000gr rc car. 1267 is one of the most preffered servo for 1/8 scale models. I suggest it if you have an esc supports 7.4v or an external bec. Also, 2274 is an brushless servo which has longer life cycle and draw less amp compared to coreless motor.
savox sb 2274sg
Speed:
@7.4V: .08 sec/60
@6.0V: .105 sec/60
Torque:
@7.4V: 347.2 oz-in
@6.0V: 277.7 oz-in
savox sa 1258tg (not high voltage servo)
Speed(@6.0V sec/60): .08
Torque(@6.0V oz-in): 166.6
savox sc 1267mg
Torque: @7.4v - 277.7 oz-in / 21 kg-cm
Speed: @7.4v - 0.09 sec/60°
#7
ace ds1015
very good pricing, super fast under 6v, precise, silent...
way better than all the 1258tg I had
savox is savox, it's ok for the price but they are neither smooth or silent or efficient.. they are average (I owned many of them)
top brands: kopropo, futaba, sanwa, JR, radiopost..
good brands: ace, hitec, graupner...
very good pricing, super fast under 6v, precise, silent...
way better than all the 1258tg I had
savox is savox, it's ok for the price but they are neither smooth or silent or efficient.. they are average (I owned many of them)
top brands: kopropo, futaba, sanwa, JR, radiopost..
good brands: ace, hitec, graupner...
#8
Tech Adept
ace ds1015
very good pricing, super fast under 6v, precise, silent...
way better than all the 1258tg I had
savox is savox, it's ok for the price but they are neither smooth or silent or efficient.. they are average (I owned many of them)
top brands: kopropo, futaba, sanwa, JR, radiopost..
good brands: ace, hitec, graupner...
very good pricing, super fast under 6v, precise, silent...
way better than all the 1258tg I had
savox is savox, it's ok for the price but they are neither smooth or silent or efficient.. they are average (I owned many of them)
top brands: kopropo, futaba, sanwa, JR, radiopost..
good brands: ace, hitec, graupner...
#9
hitec 7955tg is a strong choice also, many drivers use it at 7,4v
#10
#11
murat61 THX your PM
#12
#13
I I have not used this brand, I watched on ebay, its price seems expensive than savox.
ace ds1015
very good pricing, super fast under 6v, precise, silent...
way better than all the 1258tg I had
savox is savox, it's ok for the price but they are neither smooth or silent or efficient.. they are average (I owned many of them)
top brands: kopropo, futaba, sanwa, JR, radiopost..
good brands: ace, hitec, graupner...
very good pricing, super fast under 6v, precise, silent...
way better than all the 1258tg I had
savox is savox, it's ok for the price but they are neither smooth or silent or efficient.. they are average (I owned many of them)
top brands: kopropo, futaba, sanwa, JR, radiopost..
good brands: ace, hitec, graupner...
#14
Tech Adept
#15
Why I can not open this link?
BTW,I wanna to try the savox 1251 or Power star 8509.Anyone know what is the difference between them?
BTW,I wanna to try the savox 1251 or Power star 8509.Anyone know what is the difference between them?