Want to verify PSU question
03-04-2014 | 07:25 AM
#1
Thread Starter
Tech Apprentice
Joined: Dec 2013
Posts: 63
Want to verify PSU question
Just ordered a couple dell 2850 off ebay and need to float dc ground. Looks straight forward, isolate the PCB from chassis with nylon spacers and screws. Disconnect DC ground wire going to chassis.
Only do this on one unit. When this is done, it is safe for chassis to touch I presume ? I'll most likely put something between the psu as extra precaution.
Will need to find diagram for connections for 12v and fan speed, have seen it on here before.
Am I missing anything ?
Lthanks
Only do this on one unit. When this is done, it is safe for chassis to touch I presume ? I'll most likely put something between the psu as extra precaution.
Will need to find diagram for connections for 12v and fan speed, have seen it on here before.
Am I missing anything ?
Lthanks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
