DX3R PRO or M12?
#1
Thread Starter
Tech Initiate
Joined: Sep 2009
Posts: 45
From: UT
Getting back into racing with the onset of the TLR 22 2.0. I am now looking into upgrading some of my electronics. In this case I am trying to determine if an Airtronics M12 is really worth the additional cost over a Spektrum DX3R PRO?
I figure they both work, but what do I gain for the $200 if I was to purchase an M12?
As a side note are the Airtronics servos which also seem a little on the expensive side actually any better?
Thanks for your input.
I figure they both work, but what do I gain for the $200 if I was to purchase an M12?
As a side note are the Airtronics servos which also seem a little on the expensive side actually any better?
Thanks for your input.
#4
Not really a great comparison, your talking the Sanwa uber end model vs something that won't touch it for build or features.
But like has been said, MT4 is a 'very' popular model, for speed and feel it's a much better bit of gear vs the Spektrum, actually a lot of people buy the MT4 vs getting a M12, cause the 4 is compact and light, with just about everything you will ever need.
But like has been said, MT4 is a 'very' popular model, for speed and feel it's a much better bit of gear vs the Spektrum, actually a lot of people buy the MT4 vs getting a M12, cause the 4 is compact and light, with just about everything you will ever need.
#5
Thread Starter
Tech Initiate
Joined: Sep 2009
Posts: 45
From: UT
Thanks for the input, was never really afraid of the price, just trying to understand what the differences were. I will likely jump into an M12, in the past I really enjoyed my M8.
Off to determine what servo I will run with it.
Off to determine what servo I will run with it.




