Tekin RS Gen 2
The RS GEN2 brushless speed control is the next generation in intelligent operating motor drive technology. Continuing the proven award-winning legacy of the RS familly, the GEN2 is fitted with todays state of the art components. The RS GEN2 delivers what racers require; reliability, precise control and unmatched power handling capability.
Packed with new features, the RS GEN2 delivers a programmable high-voltage BEC, an EZ Access Port for HotWire communication and Datalogging capabilities in a small sized package. Rated for 8.5 turn motors and higher, the GEN2 is the perfect ESC for both experienced and new racers. Couple the RS GEN2 with a Redline GEN2 brushless motor for the ultimate package in race equipment. Features: Ultra-smooth and Precise Throttle and Braking Control Compatible with Sensored/Sensorless Brushless and Brushed Motors Easily Access Programming, Anywhere, Anytime Datalogging Capability High Voltage Programmable BEC EZ Access HotWire Programming Port HotWire PC Interface for Advanced Programming and Updating D2: Dual Drive Mode Technology On-Board Temperature Indicator HDAC: High Density Copper PCB's Sensor Plug for Precise Commutation with all Motors Gold-plated Solder Posts for Easy Wire Replacement Self Test Diagnostics and Factory Reset Pit Tune Mode DGF2: Digital Glitch Filtering V2 QuickTune™ Programming One-Touch Radio Calibration Program Features: High Voltage BEC (6.0v/7.4v)* Drag Brake (13 steps) Brake / Reverse Strength (13 steps) Current Limiter (none + 12 steps) Neutral Width (13 steps) Timing Profiles (5 preset - 2 custom*) Adjustable Throttle and Brake Minimums Custom Throttle Curves Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay Voltage Cutoffs (none, 2S, 3S, Custom) Timing Boost and Turbo when used with Hotwire ROAR Race Spec "Blinky" Mode Save, Load and Share custom ESC setup files Extensive Tuning via Tekin HotWire PC Interface *Requires HotWire Sold Seperately SPECS: Controls: Forward/Brake/Reverse Input Voltage: 4-9 Cells, 2S-3S Lipo BEC: 6.0v / 7.4v 5.5amps Motor Limit Brushless Mode: 8.5 Turn, 540 2-pole (36mm) Motor Limit Brushed Fwd Only Mode: 10 Turn Motor Limit Brushed Fwd/Rev Mode: 12 Turn Timing Profiles: 7 choices (on board) Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay Dimensions: 1.0 x 1.3 x .51in (25.4 x 33 x 12.9mm) Weight: 2.0oz / 48g with wiring http://www.teamtekin.com/graphics/ba...er_3182013.png http://rcinsider.com/?p=45254 http://rcinsider.com/wp-content/uplo...3322133600.png |
Glad I picked up a Duratrax DE10 for my DESC210R since Randy hinted this was on the horizon. Wonder what new features it will have programming wise?
|
:sneaky:
|
Originally Posted by TY@TEAMTEKIN
(Post 11938953)
:sneaky:
|
Originally Posted by ilanstylz
(Post 11938956)
Guess that means that we'll have to wait til next week or so to find out more details right? :D
|
Will the production models have white cases? Can you tell us that? :) I actually hope not, or at least an option for the traditional black case.
|
Originally Posted by TY@TEAMTEKIN
(Post 11938960)
It's got some new goodies that I'm really excited about. It is VERY smooth, great braking. I'll let you guys know more when I can! It will be an awesome mild-mod, super stock and stock controller.
I LOVE the white case! |
Yes on smoothness, it has a great feel. Yes on the white cases. Black will be available but I love the white, it stands out and pops!
|
I agree it does stand out. Some cars I like to black everything out on though. ;)Glad to hear the black will be an option though.
|
I love the white, it'll go perfectly with my japanese mylaps ;-)
Hmm and by the looks of the pic it has a place for the hotwire to plug into on the esc instead of having to unplug your rx wire...... |
Will there a a RS Pro Gen 2 for mod motors?
|
I hope it has a bigger bec, I hate having to pay $20 just to run my savox servo. That's why I went viper :)
|
Originally Posted by skengines
(Post 11939006)
Will there a a RS Pro Gen 2 for mod motors?
|
Originally Posted by OMG23RC
(Post 11939009)
I hope it has a bigger bec, I hate having to pay $20 just to run my savox servo. That's why I went viper :)
|
Originally Posted by skengines
(Post 11939006)
Will there a a RS Pro Gen 2 for mod motors?
|
So this is not what the RSX will be based on? And I hope there is a pro version. Also love the white case. Goes perfect for my traxxas tcp
|
Yea a black pro version would be killer. Will the new rspro or old one ever use a google operating system or just windows for the hotwire.
|
Originally Posted by rc10t3b4
(Post 11939145)
So this is not what the RSX will be based on? And I hope there is a pro version. Also love the white case. Goes perfect for my traxxas tcp
Originally Posted by OMG23RC
(Post 11939009)
I hope it has a bigger bec, I hate having to pay $20 just to run my savox servo. That's why I went viper :)
FWIW, I'd like to see a 1/10 scale ESC that can handle the 550 can motors. |
Definitely looking to the Pro version and I will be picking up one in white. :D
|
This is replacing the RS, there will be a different controller for full mod. I run a 10.5 boosted in my 22 for mod.
|
will you be able to upload the new software thru the hotwire on to the older RS?
|
Every time I talk to Tekin at the track they say they're always working on something. ;)
From what I saw in person you will be able to hook up the hotwire without removing the servo lead from the RX. In the first photo you can see the three pin connector. I think they (Tekin) said something about a better BEC output but I'm not sure on that one, we'll have to wait and see. |
Originally Posted by Jim Frahm
(Post 11940822)
Every time I talk to Tekin at the track they say they're always working on something. ;)
From what I saw in person you will be able to hook up the hotwire without removing the servo lead from the RX. In the first photo you can see the three pin connector. I think they (Tekin) said something about a better BEC output but I'm not sure on that one, we'll have to wait and see. and man I hate to remove it from the rx that is the best idea I seen in a long time. |
Really looking forward to the full mod version. That's all I need for my 4mod now is a new ESC. Just hope it happens before the end of the month!
|
Originally Posted by Jim Frahm
(Post 11940822)
Every time I talk to Tekin at the track they say they're always working on something. ;)
From what I saw in person you will be able to hook up the hotwire without removing the servo lead from the RX. In the first photo you can see the three pin connector. I think they (Tekin) said something about a better BEC output but I'm not sure on that one, we'll have to wait and see. |
Originally Posted by Redwings
(Post 11941283)
Looks like Tekin is going to come out with a fancy digital / upgradable program card of box, Hopefully. This would definitly eliminate the laptops at the track.
http://www.rctech.net/forum/11925616-post59.html |
Sold my RS just in time for this! Can't wait for the Pro version to be released.
|
Originally Posted by Biz1974
(Post 11940790)
will you be able to upload the new software thru the hotwire on to the older RS?
Originally Posted by Redwings
(Post 11941283)
Looks like Tekin is going to come out with a fancy digital / upgradable program card of box, Hopefully. This would definitly eliminate the laptops at the track.
|
LOVE the white case! :sneaky:
|
[QUOTE=TY@TEAMTEKIN;11941684]No.
That stinks! Will you possibly be offering an exchange program like some of the competitors? |
Originally Posted by Biz1974
(Post 11943385)
Originally Posted by TY@TEAMTEKIN
(Post 11941684)
No.
That stinks! Will you possibly be offering an exchange program like some of the competitors? |
So no program card? Sticking with the hotwire for this gen2 esc's?
|
Randy said they can do better than a program card. Damn him for also be so vague! Should have been in politics.
I predict bluetooth/WiFi connectivity. |
lol, I am not sure i want my android connecting to my esc. I have little faith in the phone OS, lol.
|
Good job guy's love the white:nod::nod::nod:
|
Politics? Me? Nah...I'm a bit too blunt for that I think ;)
Patience guys...it will be worth the wait. |
I can't wait anymore, expect my app to the the first next time you're looking for team drivers.
|
Originally Posted by t0p_sh0tta
(Post 11947789)
Randy said they can do better than a program card. Damn him for also be so vague! Should have been in politics.
I predict bluetooth/WiFi connectivity. I'm guessing its going to be something along those lines. |
Same hotwire can be used? I almost broke the seal on the orion I just bought till I saw this lol
|
Gen2 ESC Hotwire adapter. What could this be for? :sneaky:
|
All times are GMT -7. It is currently 12:40 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.