![]() |
tekin rx8 question
Ok well background. I have a losing scte with the rx8 and 5200kv tenshock s411 motor. My lipos are not discharging evenly when I am using them. The will be balanced previous to use but 1 cell will be down to low. So its not even. What could be wrong
|
Originally Posted by Mindcrimes
(Post 11621954)
Ok well background. I have a losing scte with the rx8 and 5200kv tenshock s411 motor. My lipos are not discharging evenly when I am using them. The will be balanced previous to use but 1 cell will be down to low. So its not even. What could be wrong
|
Its doing it to all lipos even my new one.
|
U have to have GOOD batterys for a tenshock, it pulls ALOT of juice.
|
U dont need Good batteries You Need High Discharge batteries.That actually deliver what they say... some just dont have what the label says Like nano techs..FYI there is no such thing as a 50C lipo false info at max the lipo cells can deliver is 32C Max and 50C burst for 2-5 seconds..
Its your batteries thats the only problem in this POST.. |
Originally Posted by Mindcrimes
(Post 11625813)
Its doing it to all lipos even my new one.
|
I'm using hobby people 35c lipos. I don't remember the voltage offhand. But it was off by 1v from the other cell
|
How is that even possible to do? Maybe check them with another checker or different charger wires?
|
Originally Posted by rallyredevo
(Post 11630611)
How is that even possible to do? Maybe check them with another checker or different charger wires?
|
Originally Posted by Carpet Racer69
(Post 11626708)
U dont need Good batteries You Need High Discharge batteries.That actually deliver what they say... some just dont have what the label says Like nano techs..FYI there is no such thing as a 50C lipo false info at max the lipo cells can deliver is 32C Max and 50C burst for 2-5 seconds..
Its your batteries thats the only problem in this POST.. |
Originally Posted by Mindcrimes
(Post 11630668)
We did same result. When you blow up 2 lipos the same way in a row. I'm sure ive checked
|
Originally Posted by rallyredevo
(Post 11630680)
I wasn't aware there was an absolute max discharge rate of lipo batteries. I guess my 6900 mah 100C batteries are really 32C?
|
Originally Posted by nitro_mt_racer
(Post 11631329)
What's the current limiting set at on the RX8? My initial thought would be the same as stated earlier.....your batteries just aren't up to the task whether they're new or used.
|
Originally Posted by rallyredevo
(Post 11631357)
The current limit doesn't limit the max current overall, just how much it uses from a dead stop where electric motors make their most torque.
|
Originally Posted by nitro_mt_racer
(Post 11631340)
It's true...anything more than about 40c is just smoke and mirrors. When one company advertises a 65c pack the rest have to follow or risk losing sales. It's truly unfortunate for the consumer that there isn't a standardized testing procedure for lipo cells.
My truck pulls over 4000 mah out of the battery in a 5 minute heat, so it's pushing 2s to the limit, whatever that limit may be. There is only 1 long straight at my track, and the rest is medium-slow finesse with a double-triple, and some technical bits, so imagine how many amps it's pulling WOT if i'm barely on-throttle the rest of the time. |
| All times are GMT -7. It is currently 08:06 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.