I talk with a guy at LRP who was very helpfull said the same thing I tried that and it didn't help unless I was playing with the EPA wrong. What should it be set at normally the EPA in the transmitter I have a radiopost Any help would be great? Thanks for your input

Thanks Chris

Bought an LRP Flow Worksteam 2 weeks ago and now it seems to be damaged.

My car knows only full throttle with a 13.5T X20 in Zero-Boost Mode. Tried to setup it again, but it didn't work.

Very curious that my car always giving pulsating throttle if i'm in the Throttle SET-Mode. Neutral and Brake SET-Mode nothing happens, only in the Throttle-Mode my car is pulsating.

Need help..FDR & setting for lrp x20 7.5t and flow esc
 

need help to find fdr for lrp X20 7.5t motor and setting for my flow esc. Outdoor track with +-30meter straight line with technical inside with average laps around 18-19s per lap. Outdoor temp average around 34-38 celcius during midday. ty for help

Boosted class?

8:1 fdr and add boost to taste.

I got this and want to use it in my T4.1 whats a good 17.5 motor to go with it?

Anybody have one for sale? Also can I run a sxx in a mod class? What's the difference between the works tea, and competition? Thanks

DOES ANYONE KNOW WHEN THE NEW SOFTWARE WILL BE REALEASED !!

Posted 3 days ago:
http://www.rctech.net/forum/12849380-post11313.html

Worksteam can handle more power than the competition, and is more expensive. I'm not sure if there are any other differences.

-Mike

Nope that is all.
The works can handle a lower turn motor and comes with a fan, that is the only differences between the two.:nod:

get the works never have to worry about motorsize.

the Works Team operates at 400 amps per phase and the Competition operates at 200 amps per phase.

Specs...

Competition ESC
 

I have a competition ESC speedo, I know as per the manual that a motor 9.5T and less is not reccomended. But if a lets say use a 4.5T motor and a fan from LRP that the works use can I still damage the ESC? What will happen? I'm only curious so please don't judge me for asking a question. Thanks

Due to the amp limitations of the competition vs the Works Team, you cannot go lower then 9.5T with or without a fan. This ESC was designed with less fets for the use in stock type racing.

Its there a delay reverse? can find how to do it.