R/C Tech Forums
Page 28 of 123
« First
18
26
27
28
29
30
38
78
Last »
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   New LRP Flow Esc (https://www.rctech.net/forum/radio-electronics/645867-new-lrp-flow-esc.html)

Mi4cxl 03-13-2013 08:11 AM
Cheers for that. Can send mine off now for a replacement. Cheers.

microtee 03-14-2013 08:58 PM
Originally Posted by Aaron_M (Post 11773219)
Has anyone had any problem with the LRP flow V1.4 runinning boosted and using LRP X12 motor?

Was running a LRP X12 10.5 on my Hobbywing ESC with no problems, then put it on my LRP flow. It ran ok but then 3 minutes in it began to stutter, then no power then all of a sudden lots of power.

Changed sensor cable and still didnt cure it. Also it is not the ESC as i put a Reedy Sonic 10.5 on it and its fine.

Any ideas? :confused:

I have the same problem with my flow. I still cant find the cure. anyone?

JOE SI 03-15-2013 11:00 AM
Mine did the same thing once I started using savox 1251 but didn't do it with my Ko servos for some reason, I added a cap to the aux port on my Rx(glitchbuster) and it works fine..
For some reason it didn't do it until I changed from my reedy sonic to thunder power, maybe TP was drawing more amps or whatever to run who knows but it hasn't done it since

GMartinez 03-15-2013 02:03 PM
lrpflow#80970 back instock we just got 20 in & website will update in a couple of hrs
free ship use rctech code for free ship

JustWill75 03-17-2013 11:32 AM
USB BRIDGE SPEC.2 WINDOWS 8
 
I can't get my usb bridge to work with my Laptop running window 8. Can anyone give me some help?

Cridd 03-17-2013 11:38 AM
Originally Posted by JustWill75 (Post 11940376)
I can't get my usb bridge to work with my Laptop running window 8. Can anyone give me some help?
Can you run as admin? Can you run program in older version if you right click on it.

JustWill75 03-17-2013 06:28 PM
I think its the driver

peter. 03-18-2013 08:55 AM
what gear ratio do you use with a 13.5t motor with boost on the flow esc

Mi4cxl 03-18-2013 09:12 AM
Originally Posted by JustWill75 (Post 11941718)
I think its the driver
Don't put yourself down, I'm sure you drive just fine. :lol:

techmann51 03-18-2013 02:25 PM
im using a Novak 13.5 ballistic motor with my flow. it is faster than with the Novak kinetic esc. I love it

JustWill75 03-18-2013 03:49 PM
Originally Posted by Mi4cxl (Post 11943957)
Don't put yourself down, I'm sure you drive just fine. :lol:
:lol::lol::lol::lol:

It may just be me anyway......

TonyWest 03-19-2013 08:53 PM
Is there a set up out there for off road with the stock software. If you have to have a bridge to update they should sale as a combo.

metalnut 03-20-2013 11:33 PM
Originally Posted by TonyWest (Post 11950875)
Is there a set up out there for off road with the stock software. If you have to have a bridge to update they should sale as a combo.
LRP is a business, as such they need to make money. A lot of buyers won't need the bridge, but those who do have to shell out extra money. Other companies do the same thing, it's just how the business goes.

spencehotbodies 03-22-2013 09:48 AM
Does any body know if you will feel the diffrence between the works and comption flow when running 13.5? I see it has a higher number of fets.

008-Racer 03-22-2013 09:50 AM
Originally Posted by spencehotbodies (Post 11960169)
Does any body know if you will feel the diffrence between the works and comption flow when running 13.5? I see it has a higher number of fets.
I have run both with 17.5 & 13.5 and couldn't tell the difference ;)


All times are GMT -7. It is currently 03:32 AM.
Page 28 of 123
« First
18
26
27
28
29
30
38
78
Last »
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.