Nevermind guys I got it. Bad sensor wire was the culprit

Broken Lrp flow works team wires
 

Hello,
Yesterday I broke the wires of my on-off switch lrp flow esc,
the wires are located inside of the esc box.
Does anyone knows how to open the esc box and solder these two little wires?
Thanks for the help

Turn the ESC over and you will see 4 screws on the corners. Take the screws out and it will come apart. Then locate the area on the board where the switch is soldered to and re-solder. Just be mindful which wire is positive and which is negative. Also, when you're done soldering, make sure you didn't cross the solder stream with any other soldering point.

Thanks a lot!
It worked ! Perfect! Thanks!!!!:)

My ESC act weird on low speed, the red LED keep pop on when i hit the throttle gently, it only happens when the motor have some load on it, at low speed the ESC make the motor clunking noise, it works fine when tire not touch the ground. I already check the drive train, noting binding. And the motor works fine when i use another ESC. Here is the video below. Does anyone know what is wrong with my ESC. Thanks.
https://www.youtube.com/watch?v=D9YXg1iCGTY

Yes usb bridge 3 are available. ;);)
I will be able to transform my tc flow-x into an offroad version.

Anyone running the Flow X in Boosted 13.5T? I am using X20 13.5T but I am out of ideas how to get it to run faster.... Pretty much the slowest car on the track at this point and no one is running the Flow X.

Anyone know when and where to find the Flow X Stock Spec in the United States?

It is already available at LRP America store

Thank you.

Are you running the stock spec flowx?

Try a different motor, the Reedy is very popular when used with the LRP, most people in the UK run Hobbywing those that run LRP are still running the Flow I believe and as far as I know none of these run LRP motors.

removed

Currently looking for a popular pairing for 17.5 TC class. Is there any motors that are running with better luck? I just was curious to see if they are any other alternatives to TSR, or Fantom motors that can run with these guys.

R1 V16 and Motiv MC2