weekendracer_uk

Looking for some advice , stepping up from the 17.5 blinky class to mod so looking to get this speedo. Any one have some good settings for smooth low down power ? Looking to run a vampire v2 4.5 on med grip out door track with the temps close to 30c here in the UK right now so pretty hot.

CraigM

iTrader: (34)

Start with the standard mod profile and add turbo as required. The settings really depend on the size of the track, gearing, and the amount of grip. Because you're new to mod you'll probably start with 0 boost and 10/10 punch, then add turbo for the straight. As you get more confident you can start upping the boost.

Foodie

What settings in the ESC work in sensorless mode?

haywood

iTrader: (49)

Should I run the fan in blinky 17.5 TC?

IIGQ4U

iTrader: (53)

It definitely wouldn't hurt.

COBRARACING

I would recommened you always run a fan as the cooler the esc runs the more efficient it will be .

hyujmn

iTrader: (27)

I run my fan in 17.5 stock. I find that without the fan, the ESC gets up to 125-130f after 6-7 minutes of running on a medium technical carpet track.

Still well within the temperature tolerance but I still keep the fan on there anyway.

weekendracer_uk

Running in 17.5 blinky this weekend , is the standard blinky mode that comes on the Speedo the one to use or is there a better one that can be downloaded ?

pierre johnson

iTrader: (2)

This is truly a powerful esc and I would not worry about fan use unless uou intend to run mod! The heat shouldn't be a factor for 17.5 blinky..

ongbenghui

iTrader: (5)

Hi,

what is the latest firmware for v3.1 1S ? I noticed mine come with "V3.1_121129_Beta". err... still beta ?

Crashmaster

Quick question guys, is the data logger only available with the 3in1 programming box?

Cheers
Dan

pierre johnson

iTrader: (2)

I just tested this awesome piece of hardware at the circuits of the americas and it was just unbeliveably powerful and never seem to falter under extreme heat conditons especially in tc modified class..I'm sold it was worth the price and then some..great work hobbywing north america. .

scoyle

Is there anyone on this thread from the UK that would be able to share their settings for the v3.1 for 13.5 from one of the BRCA tracks like West London?

The reason I ask is that the club I race at is going to 13.5 and I will be able to adjust settings based on knowing the size of some of the BRCA tracks if that makes sense?

Thanks

markrobinson

Contact CPD Racing. I'm sure they will be able to help

scoyle

Thanks for the advice, have sent them an email...