|
Soldering Iron
Is a 60 watt solder iron good for soldering my Tekin motor wires? Also any particular type solder I should use?:confused:
|
I used a 40 watt iron on my Tekin ESC/Motor with no problems so it should be fine. Just make sure you coat the tip of the iron with solder and tin the wires and terminals that you are soldering to. A tip that helped me solder to the esc posts was to flatten the wire with pliers after tinning it. This way, it can more easily slot into the cutout on the solder post.
|
Originally Posted by mushroomed
(Post 10168307)
I used a 40 watt iron on my Tekin ESC/Motor with no problems so it should be fine. Just make sure you coat the tip of the iron with solder and tin the wires and terminals that you are soldering to. A tip that helped me solder to the esc posts was to flatten the wire with pliers after tinning it. This way, it can more easily slot into the cutout on the solder post.
Just got a sweet deal on a 3 brand new 60 watts irons! |
yes a 60 watt will work i use a 90w i also use 60/40 solder for electronics
|
| All times are GMT -7. It is currently 01:35 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.