R/C Tech Forums - M11X vs. MT4

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - M11X vs. MT4 (https://www.rctech.net/forum/radio-electronics/569249-m11x-vs-mt4.html)

If you don't need the telemetry then use the 92524 reciever, it has a third channel, it's super small and less than $50.

Even if you don't use all the telemetry sensors the real time reciever pack voltage is nice. No sensors needed for that.

Quote:

Originally Posted by TX_Punisher (Post 9951599)

It's tough to look down and check telemetry readings during a race. I guess if you're a basher, then it really doesn't matter.

If you club race, then the m11x or even the MX3X would probably be a better choice.

Quote:

Originally Posted by Rubio (Post 9948618)

About telemetry, generally speaking do you think is useful?
For instance, the engine temperature measure could be entrustable? The correct temperature is as close as you can to the glow, how can you reach a real reading with that sensor? Did you ever compare telemetry data with a temperature gauge?

My thoughs exactly. Get an M11x and you will never need another radio.