Go Back  R/C Tech Forums > General Forums > Radio and Electronics
KO's Spread spectrum system >

KO's Spread spectrum system

Community
Wiki Posts
Search

KO's Spread spectrum system

Thread Tools
 
Search this Thread
 
Old 09-12-2011 | 12:55 AM
  #1  
Thread Starter
Tech Initiate
 
Joined: Aug 2005
Posts: 35
From: United Kingdom
Default KO's Spread spectrum system

Good, bad, indifferent ?

I've been having trouble with the spectrum system installed onto my KO Stick unit. When in a heat with 10 drivers I get interference. Less people, system ok. Talking to a few others they've suffered similiar problems and all ditched the spectrum system for other brands 2.4Ghz offerings. As I'd like to keep the hand set I have I'm looking to get feedback before I fork out £150 for something that might still cause issues.

ta
markrichards is offline  
Old 09-12-2011 | 02:32 AM
  #2  
Tech Adept
iTrader: (10)
 
Joined: Apr 2010
Posts: 126
Default

Originally Posted by markrichards
Good, bad, indifferent ?

I've been having trouble with the spectrum system installed onto my KO Stick unit. When in a heat with 10 drivers I get interference. Less people, system ok. Talking to a few others they've suffered similiar problems and all ditched the spectrum system for other brands 2.4Ghz offerings. As I'd like to keep the hand set I have I'm looking to get feedback before I fork out £150 for something that might still cause issues.

ta
sorry not to answer ur question, but this has been happening to me and so as long as i keep a glitch buster on the rx side and keep my voltage above 10.8v with nimh on my tx side, i get by. i'm using a lipo pack now for my tx and that has helped me with the annoyance of recharging all the time. i've found that when my tx battery runs lower than 10.8v and there are a lot of guys using spektrum around i start to suffer but after i did those 2 things that helped me get through race nights.
platypus_s13 is offline  
Old 09-12-2011 | 02:43 AM
  #3  
Thread Starter
Tech Initiate
 
Joined: Aug 2005
Posts: 35
From: United Kingdom
Default

Originally Posted by platypus_s13
sorry not to answer ur question, but this has been happening to me and so as long as i keep a glitch buster on the rx side and keep my voltage above 10.8v with nimh on my tx side, i get by. i'm using a lipo pack now for my tx and that has helped me with the annoyance of recharging all the time. i've found that when my tx battery runs lower than 10.8v and there are a lot of guys using spektrum around i start to suffer but after i did those 2 things that helped me get through race nights.
certainly worth a try with a cap on the rx. Crammin it in on my 12th will be a challenge though. Do you know what capacity the caps are ?
I already use lipo in the tx. Battery charge was my first thought but that was still way high enough
markrichards is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.