R/C Tech Forums - calling all FUTABA 3PK users.....

Page 9 of 88

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - calling all FUTABA 3PK users..... (https://www.rctech.net/forum/radio-electronics/53009-calling-all-futaba-3pk-users.html)

RodneyRacer

01-09-2005 02:50 PM

No the screen is not blank just has lines through it

AE Racer

01-09-2005 03:05 PM

Quote:

Originally posted by jag88
I have a LRP Quant 2 and have problems with programing it to the transmitter with the the HRS recvr. I use the DSC cord and follow the manual but I can't get the full throttle l.e.d. to light when I pull the trigger.

The ESC only has the reactive frequency in punch control setting four, if you run it in another punch contol setting it may work.

jag88

01-09-2005 04:48 PM

AE Racer, Thanks, I'll give it a try !

Clegg

01-09-2005 06:31 PM

I am pretty impressed to see that contrary to what the HRS documentation says the HRS reciever and a Futaba Digital Servo work GREAT on a 4 cell 1/12th scale even when the battery starts to dump. So much for needing 6v :)

SWTour

01-10-2005 12:09 AM

3pk transmitter case/bag

...what are you guys using for a transmitter case for your 3pks?

I had a nice case for my old Futaba PCM's but the 3 pk is TOO big to fit...

Lano	01-10-2005 12:41 AM

I use a bag made by Speedmind. www.speedmind.net

TRAJ	01-10-2005 01:09 AM

1 Attachment(s)

i use the speedmind padded bag

works real good :nod:

colinradford

01-10-2005 03:22 AM

Speedmind bag for me too, sounds like it is pretty popular!

Galifrey

01-10-2005 09:34 AM

Re: 3pk transmitter case/bag

Quote:

Originally posted by SWTour
...what are you guys using for a transmitter case for your 3pks?

I had a nice case for my old Futaba PCM's but the 3 pk is TOO big to fit...

Got this sexy 3pk case when I bought my TX...

:D

TheTurtleMan

01-10-2005 12:34 PM

Has anyone used paint stripper to get the gold paint off? I was wondering if it would mess up the plastic?

rc-zombies

01-10-2005 12:51 PM

Ive worked with paint strippers... it will definately mess up the plastic...

You're better off sanding it down lightly... Prime it...
and spray with Laquer paint.. more durable than Enamel.
of course..you'll have to take the TX apart first.

JayBee

01-10-2005 10:53 PM

Quote:

Originally posted by TheTurtleMan
Has anyone used paint stripper to get the gold paint off? I was wondering if it would mess up the plastic?

HELL YEAH...
it definitely eats up the plastic, don't ever use 'strippers' on plastic, even with so-called plastic strippers you have to be careful because they don't work on all types of plastics... go figure.
Follow rc-zombies advice :nod: ;)

- JB :tire:

MR JOLLY

01-11-2005 04:48 AM

I have found out that the hrs system can operate down to 4.5 volts, not like 6 volts like it says in the book.

I am helping MRT to get a new speedo on the market & it was loosing it`s calibration(speedo) so with a scopey thingy MRT tested the radio to see why there speedo won`t hook up to my HRS system!!! so that`s how i know;)

billwilner

01-11-2005 03:32 PM

Quote:

I am helping MRT to get a new speedo on the market & it was loosing it`s calibration(speedo) so with a scopey thingy MRT tested the radio to see why there speedo won`t hook up to my HRS system

Is there a speedo on the market that will work with an HRS RX and 7.2v-8.4v pack?

I once emailed Venom and they said theirs won't run on voltage that high.

Bill

rc-zombies

01-11-2005 03:56 PM

Quote:

Originally posted by billwilner
Is there a speedo on the market that will work with an HRS RX and 7.2v-8.4v pack?

I once emailed Venom and they said theirs won't run on voltage that high.

Bill

I've ran the GT7, GTX, VFS-2000, VFS-1, Keyence pro, with no problems with the HRS receivers.

All times are GMT -7. It is currently 10:22 PM.

Page 9 of 88

« First

Last »

Show 40 post(s) from this thread on one page