http://www.shopping.franktonmodels.c...oducts_id=3045

or you can try zoom in christchurch..Zoom Resources <[email protected]>

Thanks. Just ordered the switch.

mounted the switch on my mp9, removed the uppermounting tab, double sided tape and a m3 screw through the mounting tab on the bottom and receivercase should do the trick!

Did you put a locknut on the otherside of the screw? Enough clearance? I just did mine with double sided tape, didn't want to cut the ears off right away if I change my mind on the way I want to mount it.

http://i373.photobucket.com/albums/o...l/6425398d.jpg

yes, buttonhead m3, with the head inside the receivercase and locknut outside

Who has the switch in stock?

short answer.. yes :smile:

http://www.shopatron.com/products/pr...1.1.0.0.0.0.0?

"Item is available." :)

If i disable lipo can i install a LIFE ?

yes

Anyone who has an MBX6 knows there is not much room to mount anything on the radio box. What I have done is used velcro to mount it in front of the transponder and route the plug into the box through the grommet, so there is no drilling of holes. The wire is taut and the plug just sticks out enough to reach the battery lead.

I have 3 race days with it and it has worked perfect with no movement at all on the velcro.


Attachment 798656

I have been using these in my serpent cars and they are perfect. I ran straight mini deans connectors before but these switches make like easy.

Where to put in a Dingo?:D

My PT is next to the steering servo and I don't wanna put it next to the break linkage.

KO Propo Electrical Switch 2 for sale
 

For any Aussie racers I have a brand new never been used KO Propo Electrical Switch 2 for sale. PM if you are interested.

http://www.rctech.net/forum/australi...brand-new.html

hi guys, can i use NIMH and LIFE receiver batt on the Ko Switch 2 and where could i install it on my mp9 without cutting the radio tray in half cant find a room where to put it though.

TIA