DX3R Help
 

The radio will bind up, but it will only turn right, and it glitches, and it also wont calibrate and everything has been set to 0. If you have had this or know anyway to fix it LMK! Thanks!

More info needed

What servo are you using and in what car ?

Is your servo mechanically centered correctly ?

What are your steering travel limits set at ?


What ESC are you using ?

Have you calibrated your transmitter to the ESC ?

Centre your throttle trim
Set throttle / brake travel (EPA's) at 100%
Calibrate ESC

Cheers

Have you tried the Parameter Reset, including fully working the controls?

What does the Monitor screen show when you work the controls, does it follow the servo etc?

First guy, I am using it with a savox 1258, tekin rs and yes the servo does have self centering


Yes I have also tryed the reset with no luck, seems as if after I do that it glitches more. I havent looked at the monitor will do that! Thanks for the elp and keep it coming!

Also it won't calibrate as well

What receiver? Almost sounds like you need a capacitor installed to aid your receiver in keeping the voltage up.

micro, and I am using a spekky glitch buster

Well it shouldnt have a problem then....but just to eliminate all the possibilities try removing the glitch buster and see what happens. If not, try another receiver and let us know.

I have a question . not to but in on your problem but I cant kind my book 4 my dx3r. if i want to slow down a servo i put positive expo?or what else can you do?