Mamba Max set up
 

I recently purchased a mamba max used and could use some advice on setting it up.I have it programmed thru the castle link but not shure on setting up the throttle and break and everything elts thru the castle link..I read something about setting it up for my radio also..Im running it in a 1/16 revo and will be running mostly 2 cell lipo with 3 cell every now and then.Any advice would be appreciated.

What motor and batteries are you using ?

If you are using the stock motor and decent batteries these are the settings I use

Auto lipo mode
Lipo cutoff 3.4v / cell
Brake 60%
Start power high

Everything else default

Set your throttle and brake travel at 100% in the radio, then calibrate the ESC to set the endpoints

Cheers

Stock brushless velineon motor with SPC 2 and 3 cell lipo..Airtronics MX3 FM radio.

Those settings will be fine then, you may want to change the braking to suit your liking

Cheers

Any suggestion on the forward power and the punch control?

Leave them at default mate

Forward power 100%
Punch disabled


Cheers