LRP SXX StockSpec V2 ESC
#736
#737
SXX Stock Spec V2 and Speed Passion 10.5T 1 cell
Hello,
On my 1/12th I have a SXX Stock Spec V2 (firmware 4.4) and a Speed Passion 10.5T 1 cell motor.
I was thinking to go for this setup as a starting point : 1,8,10,2 with a rollout of 49mm
Do you think it's a good start?
Thanks
On my 1/12th I have a SXX Stock Spec V2 (firmware 4.4) and a Speed Passion 10.5T 1 cell motor.
I was thinking to go for this setup as a starting point : 1,8,10,2 with a rollout of 49mm
Do you think it's a good start?
Thanks
#740
#742
Tech Elite
iTrader: (2)
I will say this: LRP has pissed me off, five months after I bought my Stock Spec its BEC gave up, so I sent it in. They have had it for 24 days now, and I was told (in a round-about way) that I wont get a new one for about another month. Two months is a LONG service call. No more LRP.
On a separate note, will anybody trade me a Tekin RS Pro for a brand new Stock Spec V2 in the near future? (amendment: I should wait to have it before I consider a trade)
On a separate note, will anybody trade me a Tekin RS Pro for a brand new Stock Spec V2 in the near future? (amendment: I should wait to have it before I consider a trade)
Last edited by DesertRat; 11-14-2011 at 07:21 PM.
#743
I will say this: LRP has pissed me off, five months after I bought my Stock Spec its BEC gave up, so I sent it in. They have had it for 24 days now, and I was told (in a round-about way) that I wont get a new one for about another month. Two months is a LONG service call. No more LRP.
On a separate note, will anybody trade me a Tekin RS Pro for a brand new Stock Spec V2 in the near future?
On a separate note, will anybody trade me a Tekin RS Pro for a brand new Stock Spec V2 in the near future?
Last edited by cheehtae; 11-15-2011 at 04:07 AM.
#744
let me know how your nosram goes NR, im planning to get one too.
#746
#747
Been a while since I posted on here about X12 13.5 (4dot insert) touring settings on 4.4 software (a must). I have ended up using the LRP Radical fan at all times now. I converted my car to titanium screws to compensate the fan's weight.
Ardent Raceway: feel 3....boost 11, FDR 6.0, drag 1
Smaller tracks I reduce feel to 1 and boost to 7 to start. If I come off cool I up the boost.
That's all I do and it's brill.
I'm doing the Winter Nationals at Ardent raceway in January. So I'll soon have some X12 10.5 settings. I'm going to start with my small tracks settings and 7.2 FDR. If you know better settings let me know! Thx!
Ardent Raceway: feel 3....boost 11, FDR 6.0, drag 1
Smaller tracks I reduce feel to 1 and boost to 7 to start. If I come off cool I up the boost.
That's all I do and it's brill.
I'm doing the Winter Nationals at Ardent raceway in January. So I'll soon have some X12 10.5 settings. I'm going to start with my small tracks settings and 7.2 FDR. If you know better settings let me know! Thx!
#748
Been a while since I posted on here about X12 13.5 (4dot insert) touring settings on 4.4 software (a must). I have ended up using the LRP Radical fan at all times now. I converted my car to titanium screws to compensate the fan's weight.
Ardent Raceway: feel 3....boost 11, FDR 6.0, drag 1
Smaller tracks I reduce feel to 1 and boost to 7 to start. If I come off cool I up the boost.
That's all I do and it's brill.
I'm doing the Winter Nationals at Ardent raceway in January. So I'll soon have some X12 10.5 settings. I'm going to start with my small tracks settings and 7.2 FDR. If you know better settings let me know! Thx!
Ardent Raceway: feel 3....boost 11, FDR 6.0, drag 1
Smaller tracks I reduce feel to 1 and boost to 7 to start. If I come off cool I up the boost.
That's all I do and it's brill.
I'm doing the Winter Nationals at Ardent raceway in January. So I'll soon have some X12 10.5 settings. I'm going to start with my small tracks settings and 7.2 FDR. If you know better settings let me know! Thx!
#749
Tech Regular
#750