![]() |
NOVAK. THIS IS IT!
THIS IS IT NOVAK!
FOR ALL THIS TIME I WAS FOOLISH ENOUGH TO BUY YOUR UNSUPPORTIVE NOVAK ESC'S FOR THE PAST YEAR! DO YOU KNOW HOW MANY NOVAK ESC'S I'VE BOUGHT JUST IN 1 YEAR? I'VE BOUGHT SIX NOVAK ESC'S 1ST ESC WAS MY NOVAK SYLDR. ITS DEAD NOW BECAUSE I ACCIDENTALLY SHORT CIRCUIT IT IN REVERSE, SO THATS OK BECAUSE MY FAULT. 2ND ESC WAS THE NOVAK HAVOC PRO. IT HAD CUT OFF PROBLEMS AT FIRST. THEN AFTER ALMOST A WEEK LATER, IT BURNT FOR NO REASON AT ALL! 3RD ESC WAS AGAIN THE NOVAK HAVOC PRO. HAD NO PROBLEMS TILL ONE DAY IT TOO BURNT FOR NO REASON AT ALL THE LAST THREE WERE BOUGHT FORM NOVAK USA AND WERE JUST USED TODAY 4TH IS THE NOVAK GTB I RECENTLY BOUGHT AND RESERVED ON 14 SEP 2010. TODAY I JUST INSTALLED THE ESC ON MY BUGGY. AND THE ESC DID NOT RESPOND TO ANYTHING AT ALL. IT DIDN'T EVEN LIGHT UP. 5TH ESC IS THE NOVAK SLYDR WHICH I BOUGHT FOR MY FRIEND IT WORKS FINE. JUST THE THE FACT THAT THE FAN NEVER WORKED AT ALL. 6TH IS ALSO THE NOVAK SLYDR. SO FAR ITS WORKING PERFECTLY, FOR NOW IM A DIE HARD NOVAK FAN BUT I DONT THINK ITS WORTH IT ANYMORE SINCE ITS GIVING ME SO MUCH PROBLEMS.I CAN POST THE PICTURES TO PROVE IT:flaming::flaming::flaming::flaming: MY ESCs http://i52.tinypic.com/65rif4.jpg My FRIENDS ESC WHICH I BOUGHT FOR HIM http://i55.tinypic.com/ohnwc5.jpg |
Maybe it is your steering servo.....
I have seen a bad servo fry an ESC.... it also maybe all that Humidity you have in Singapore.....;) I personally have several Novak ESCs and I have had nothing but good luck.... |
I've had 3 this year. 1 has gone bad and novak took care of it as soon as I told them what happened.
Novaks service is excellent in my book. |
novak has good customer service, but i would reserve on their product quality, i know exactly what are you talking about ..i had a GTB last year and after numerous attempt i couldnt get it to work, the ESC lid up but did not response to throttle input. it was sent back and forth and finanly to a point i coundt take it anymore and sold the thing for a Tekin, my RS has been reliable and problem free.
|
I am curious... did you assume it was the ESC fault each time or did you maybe try and interrogate other issues that you could be having... seems to me like you are almost blowing these things up yourself if you havent tested your other electronics... :rolleyes:
|
try a different brand. if it blows up, let us know.
|
Originally Posted by Bermbuster
(Post 7955366)
Maybe it is your steering servo.....
I have seen a bad servo fry an ESC.... it also maybe all that Humidity you have in Singapore.....;) I personally have several Novak ESCs and I have had nothing but good luck.... Only 2 of them had Problems with the havoc pro before Is 81 degrees F hot, how is it like in your place?
Originally Posted by orgnoi1
(Post 7955437)
I am curious... did you assume it was the ESC fault each time or did you maybe try and interrogate other issues that you could be having... seems to me like you are almost blowing these things up yourself if you havent tested your other electronics... :rolleyes:
Servo Futaba S9551 to Futaba BLS9551 TX Sanwa MX3-FG to Sanwa M11X RX sanwa RX442FS to RX-451 LiPo Battey Acorn racing 3800mAh 36C to Team Orion Carbon Molecular 5000mAh 45C |
Originally Posted by R3VoLuTiOn
(Post 7957256)
try a different brand. if it blows up, let us know.
Novak Or Nothing its in my blood :sneaky: |
Try Novak Kinetic.
|
Novak Pro
I have one that I run in RCGT with a 17.5 Ballistic.
It is coming out of the car today. It is 'working', but I find the way it 'works' is annoying: -- The colored LEDs to program are nearly impossible to see at the track (especially the amber and blue in the bright light). -- Novak is not temperature tolerant. I struggle and worry about temps on hot days. So far, so good on temps, but I am not as fast as others cars due to the size of the pinion I am limited to (35/70 and would like to bump to 37/70) -- The ESC seems to 'forget' sometimes. I have had to reprogram it 5 times (not at the track due to the bright light) to provide 'reverse'. I am reprograming it again to work in reverse before I leave the house for the track later this morning. -- There are plenty of racers at the track that are NOT running Novak. Many of them had Novak and experienced a burnt out system due to heat. I have personally seen one guy burn out 2 of them since May. He is running normal equipment in a normal way. All related to heat. I picked up a Tekin RS and Hotwire two days ago. Plugged it in to my computer last night and updated the software to the latest version, programmed the ESC via the Hotwire and updated the ESC in a matter of 10 mins. I am impressed. As I look around our group of racers, all the fastest and most consistent racers are running non-Novak systems. Novak has a good marketing approach and they are reasonably priced. That does not make them viable solutions for racers that are looking for consistent and solid performance. I am not knocking Novak and have not had a really negative experience (other than the ESC 'forgetting settings'), but I think for serious racing where heat is a concern, you might be better off with another brand. I understand brand loyalty, but it seems to be that after having to replace a product a few times, the typical racer would move on to something else. Good luck! Great racing! |
Originally Posted by oldpugva
(Post 7957745)
I have one that I run in RCGT with a 17.5 Ballistic.
It is coming out of the car today. It is 'working', but I find the way it 'works' is annoying: -- The colored LEDs to program are nearly impossible to see at the track (especially the amber and blue in the bright light). -- Novak is not temperature tolerant. I struggle and worry about temps on hot days. So far, so good on temps, but I am not as fast as others cars due to the size of the pinion I am limited to (35/70 and would like to bump to 37/70) -- The ESC seems to 'forget' sometimes. I have had to reprogram it 5 times (not at the track due to the bright light) to provide 'reverse'. I am reprograming it again to work in reverse before I leave the house for the track later this morning. -- There are plenty of racers at the track that are NOT running Novak. Many of them had Novak and experienced a burnt out system due to heat. I have personally seen one guy burn out 2 of them since May. He is running normal equipment in a normal way. All related to heat. I picked up a Tekin RS and Hotwire two days ago. Plugged it in to my computer last night and updated the software to the latest version, programmed the ESC via the Hotwire and updated the ESC in a matter of 10 mins. I am impressed. As I look around our group of racers, all the fastest and most consistent racers are running non-Novak systems. Novak has a good marketing approach and they are reasonably priced. That does not make them viable solutions for racers that are looking for consistent and solid performance. I am not knocking Novak and have not had a really negative experience (other than the ESC 'forgetting settings'), but I think for serious racing where heat is a concern, you might be better off with another brand. I understand brand loyalty, but it seems to be that after having to replace a product a few times, the typical racer would move on to something else. Good luck! Great racing! Yea man I totally agree with you on the ESC lights |
Posted photos as said
|
Adam, please contact [email protected]
Because I am not part of Novak's technical support group, I suggest you email [email protected] with your question, Our regular CS/Tech Support hours can be located here. Before emailing, take a moment to review the instructions (trouble-shooting guide) originally included with your Novak Item:
Novak Instruction Downloads Trouble-shooting TeamNovak's One Touch™ Speed Controls Please make your initial email as detailed as possible. Include: ~ speed control (brand/model) ~ motor (brand/wind) ~ number/type of cells ~ battery, brand (c rating/capacity ~ rotor (old/new) ~ connectors used ~ servo (brand/model) ~ radio system (receiver/transmitter) ~ vehicle & gearing ~ warranty claim? ~ lipo cut-off, on/off ~ any external modules (BEC/brand, Glitch Buster) ~ other important info: water damage, corrosive chemical sprays, excess heat, etc I have forwarded this thread to our Engineering department. |
Originally Posted by NovakTwo
(Post 7963166)
Because I am not part of Novak's technical support group, I suggest you email [email protected] with your question, Our regular CS/Tech Support hours can be located here. Before emailing, take a moment to review the instructions (trouble-shooting guide) originally included with your Novak Item:
Novak Instruction Downloads Trouble-shooting TeamNovak's One Touch™ Speed Controls The more information you provide in your first email, the more quickly tech support can offer you assistance. I have forwarded this thread to our Engineering department. Now, What really Pisses me off is that. YOU GUYS SENT ME A DEAD ESC WHICH I PAID FOR ONE SHIPPING TRIP. NOW I HAVE TO PAY ANOTHER TWO SHIPPING TRIPS FEES TO SEND AND RETURN MY ESC? So,I think its not fare for me to pay the shipping costs for the problem you guys sent me One shipping to Singapore cost US$35.00 In SG$46.70 |
~ speed control (brand/model) - NOVAK
~ motor (brand/wind) - NOVAK Ballistic 6.5 ~ number/type of cells - 2S LiPo ~ battery, brand (c rating/capacity - Team Orion 5000mAh 45C ~ rotor (old/new) - New ~ connectors used - Deans Plug and Bullet Plug On Battery Side ~ servo (brand/model) - Futaba BLS9551 ~ radio system (receiver/transmitter) RX-451/M11X ~ vehicle & gearing - Tamiya DB-01R FDR 10.38 ~ warranty claim? None ~ lipo cut-off, on/off - Default ~ any external modules (BEC/brand, Glitch Buster) - None ~ other important info: water damage, corrosive chemical sprays, excess heat, - everything works E.g Servo, Rx, And ESC Fan except the esc. its not even able to flash any LEDs |
| All times are GMT -7. It is currently 11:27 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.