Nope not kidding at all... Me and Hatebreed went racing the other day... im with JUstock with turbo and he with a HW 120 with turbo... there wasn´t any speed difference at all... raced with a Redline 17,5 and the JUstock doesnt get warm at all.

So im happy... This esc is a keeper!

SO you was able to install the 518/528 software in the justock ? If so that is just great :nod:

How you did the update? this means we can adjust the timming? please calrify. Thank you.

when you plug in the esc to your computer you can normally change the firmware on your xerun

on my justock the no timing software was locked, but gillblade could choose from all firmwares on his justock, it has the same options as all the other xerun esc`s

but his esc is the only justock i have seen with this feature, all other has the no timing firmware locked...

It is probably a xtreme stock board in the Justock but i dont think so as the factory deosnt make that mistake .As for the firmware being unlocked as that doesnt happen either and even if it did the cpu on the justock just doesnt have enough in/outs to cater for turbo firmware .

slightly off topic, but figured this may be a good place to ask. Does anyone know if the 35 amp or 60 amp xerun esc's will be able to run 1/12 pan car 13.5 1 cell lipo with a booster? I see they make a 1 cell esc, but I'd prefer to be able to use my ESC's in more than one class.

Thanks

The 1s speedy will run 2s also... down to 3.5t

I have used it with 5.5t with the included heat sink and fan... and it seemed fine..

It also runs the stock software if you need it so its quite versatile.

Turbo with a J-Stock?
Well, thats the sort of thing that can give an ESC a real bad name..... But I'll try it :lol:

Hope its an isolated incident...

well might be a bad batch maybe? no justock boards availible so they put a xtremestock in to get the esc out i dont know..strange thing either way!

Has anyone tried the 21.5 combo? Any opinions?

Pretty new to Hobbywing stuff. I am just scratching the surface on HW software/hardware specs and terminology. I'm considering a Jstock and was wondering which programming card/box I need to get to make adjustments? I assume it's the LED box.

Angelo

Could this be a copy already?

ran it in 21.5 twice now with Orion Vortex motor, great combo running my best times with this combo, i think the motor is a good choice as well.

but with 21.5 the differences between the field are not the electronics combo more the driver combo ;) which i am still working.

i still cant find a "talent in can" anywere

but +1 for the just stock

Simple question guys...

Can i reverse rotation of the motor?