Please help identify this LRP brushless ESC.
#1
I am probably going to sell this ESC but I can't tell which model
it is. There is no name on it (obviously!). It has a MODE button,
MODE light, SET button, SET light, and a sensor plug-in on one
side...the other side is the solder tabs. Both sides are plain and
the case itself is a translucent blue. It will run a brushed motor.
And help/info will be appreciated!
Thanks,
Scott
http://i848.photobucket.com/albums/a...351/lrp_01.jpg
http://i848.photobucket.com/albums/a...351/lrp_02.jpg
http://i848.photobucket.com/albums/a...351/lrp_03.jpg
it is. There is no name on it (obviously!). It has a MODE button,
MODE light, SET button, SET light, and a sensor plug-in on one
side...the other side is the solder tabs. Both sides are plain and
the case itself is a translucent blue. It will run a brushed motor.
And help/info will be appreciated!
Thanks,
Scott
http://i848.photobucket.com/albums/a...351/lrp_01.jpg
http://i848.photobucket.com/albums/a...351/lrp_02.jpg
http://i848.photobucket.com/albums/a...351/lrp_03.jpg
#5
I tried to remove the heatsink before posting the message but that heatsink
is attached very well and I was afraid to apply too much force...
The ESC does not have a cap, so I don't think it's the SPX...
Scott
is attached very well and I was afraid to apply too much force...
The ESC does not have a cap, so I don't think it's the SPX...
Scott
#7
I am probably going to sell this ESC but I can't tell which model
it is. There is no name on it (obviously!). It has a MODE button,
MODE light, SET button, SET light, and a sensor plug-in on one
side...the other side is the solder tabs. Both sides are plain and
the case itself is a translucent blue. It will run a brushed motor.
And help/info will be appreciated!
Thanks,
Scott
http://i848.photobucket.com/albums/a...351/lrp_01.jpg
http://i848.photobucket.com/albums/a...351/lrp_02.jpg
http://i848.photobucket.com/albums/a...351/lrp_03.jpg
it is. There is no name on it (obviously!). It has a MODE button,
MODE light, SET button, SET light, and a sensor plug-in on one
side...the other side is the solder tabs. Both sides are plain and
the case itself is a translucent blue. It will run a brushed motor.
And help/info will be appreciated!
Thanks,
Scott
http://i848.photobucket.com/albums/a...351/lrp_01.jpg
http://i848.photobucket.com/albums/a...351/lrp_02.jpg
http://i848.photobucket.com/albums/a...351/lrp_03.jpg




