R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   DX3R ISSUE (https://www.rctech.net/forum/radio-electronics/413280-dx3r-issue.html)

Zaint 07-02-2010 12:39 PM

DX3R ISSUE
 
DX3R problem it seems when i get 10 meters away it goes out of range. receiver led light goes off. when i get close to 5 meters it it functions normally again. What went wrong with this transmitter? what it takes to get it fix? this radio is over a year old and out of warranty. Does any one experience this kind of problem? i'm so disappointed

Scott Fisher 07-02-2010 04:34 PM


Originally Posted by Zaint (Post 7620352)
DX3R problem it seems when i get 10 meters away it goes out of range. receiver led light goes off. when i get close to 5 meters it it functions normally again. What went wrong with this transmitter? what it takes to get it fix? this radio is over a year old and out of warranty. Does any one experience this kind of problem? i'm so disappointed

It could be the receiver. Try a different receiver first. It might be something as simple as a bad antenna on either the transmitter or receiver.

racer1812 07-02-2010 09:42 PM


Originally Posted by Scott Fisher (Post 7621020)
It could be the receiver. Try a different receiver first. It might be something as simple as a bad antenna on either the transmitter or receiver.

+1 and which receiver are you using? I had 3 of the ones that come with the 3R, sr3100, take a crap and have the same on/off bind issue.....sucks at $100 a piece

Scott Fisher 07-02-2010 10:29 PM


Originally Posted by racer1812 (Post 7621956)
+1 and which receiver are you using? I had 3 of the ones that come with the 3R (3001 I think) take a crap and have the same on/off bind issue.....sucks at $100 a piece

Its the 3100. If you are going to buy DSM2 receivers, buy the 3520.

Potoczak 07-03-2010 10:47 AM


Originally Posted by Scott Fisher (Post 7622082)
Its the 3100. If you are going to buy DSM2 receivers, buy the 3520.

+1, Yes it sounds like its the receiver, but if you go with a new receiver go with the 3520, i run it in all my touring cars!!!

G33Kster 07-03-2010 12:44 PM

I had the same problem with my FS GT-3. The outer shielding of the coaxial antenna was disconnected from the circuit board and it wouldn't solder back on so I ordered a new receiver for $7 :D and everything works fine now :nod:

Dave H 07-03-2010 01:25 PM

Possibly worth a reminder to not bend or kink the exposed end of a 3100 antenna. For example don’t bend it over the end of the tube and stick a cap over it.


All times are GMT -7. It is currently 10:41 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.