hitec815bb amh eater
03-03-2010 | 01:36 PM
#1
Thread Starter
Tech Rookie
Joined: Mar 2010
Posts: 1
hitec815bb amh eater
i am using a 2000amh pack nimh to power an 815bb servo on a soling 1 meter sail boat. iam gettingless than 2 hrs run before my sail servo wont move. ichecked voltage,and read 6.36volts.is something wrong with theservo ?can iadd 0ne more 1.2v nimh battery to thepack? thanks jim
03-03-2010 | 01:48 PM
#2
an extra cell added in series will give you more voltage, but not more runtime.
With small servos in on-road cars we get about 11 mah per minute draw from a receiver pack, I'd expect that to be higher with your servo - maybe 15 mah or more. At this rate, you'd lose 1800 mah in 120 minutes (2 hrs) which sounds about right to drain a 2000 mah pack
With small servos in on-road cars we get about 11 mah per minute draw from a receiver pack, I'd expect that to be higher with your servo - maybe 15 mah or more. At this rate, you'd lose 1800 mah in 120 minutes (2 hrs) which sounds about right to drain a 2000 mah pack
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
