Just received my MMP. I noticed the BEC default is 5.5 volts. I was using a Novak Havok Pro which has the BEC listed at 6.0 volts.

Should I set my BEC at 6.0 volts on the MMP?

Running a Novak 4.5hv, Ko Propo 2511 servo and a Spectrum 2.0 radio. 2s 5000mah lipo.

Thanks Guys

I doubt that you'll be able to notice any diff in rcvr or servo performance if the BEC voltage is 5.5 vs 6.0v. It won't hurt anything to reset the MMP BEC to 6v either.

Thanks, thats what I was thinking. By the way, I'm in Houston also...Gulf Coast is my local track

I quit racing many many years ago, just not enough time. When I was into onroad, we used to have to go to San Antonio for a good track with a good race program. That was a long time ago.