KO Propo EX-10 EURUS
#1651
I just bought a used EX-10 Eurus. Et1,2,3 are not working. I saw someone here said the wiring harness came loose. However, didn't explain how to get to the connector.
Help!
Help!
#1652
I got it fixed, thanks.
#1653
Tech Initiate
Does anyone know how the spring that is supposed to center the steering wheel should sit?
#1654
Tech Master
iTrader: (12)
Question time KO guys.. I the real world is there any difference between the helios and the eurus especially bearing in mind I'm gonna be using a spektrum pro module so I don't have to replace all my RX's in various models. At the moment I have a futaba 3pks with the same spektrum pro module etc but the trigger pot is wearing out and won't center properly so as I use a mini-z module with adapter etc I thought I'd just go KO.. and I'm not interested in hearing about 2m/s faster response times etc.. real world driving for an average club level driver.I ask as I've been offered a helios cheap and I wondered how it would compare to the futaba running same module?
#1655
Tech Elite
iTrader: (10)
I'm using a Ko propo KIY and I have the helios with spektrum PRO module.. Definitely KIY is faster your more connected per say to your car problem with KIY is a headache got sorts of problem if it works its awesome but tired of re-calibrating the darn radio every time.. So I'm switching back to my I my old trusty Helios.
Last edited by Jochim_18; 10-21-2013 at 04:55 PM.
#1656
Hi. I am trying to replace the 3D trigger in the EX10 Eurus. Just want to be sure before i assemble it back. Where do I put the throttle spring? There are two anchor points in the case and 2 slots (teeth) on the white plastic. Anyone?
#1659
Amain hobbies only has the EX-10 Eurus with the miniz module. Is that the one I want to run 10th scale? I am going from a EX-5UR so will the receivers I have been using work with the miniZ module? I believe they are the 407s.
Thanks
Thanks
#1662
Thanks. That's what I thought but wanted confirmation.
#1663
ET4 is assigned from the factory to the steering travel. This will allow you to increase/decrease the steering travel (Dual Rate).
DualRate in the steering function menu is the dual rate over-ride setting for Oval racing. This you will have to assign to an ET position or to a button. Then you can set it to either toggle or a push type of action.
Looks like you set this to ET4, replacing the steering travel function. To set the steering travel back to the ET4, go to OP->INPUT->SETUP->E4 and press enter. Then scroll and assign the S:TRAVEL to this ET. With your current setting, you have S.RATE set to ET4.
DualRate in the steering function menu is the dual rate over-ride setting for Oval racing. This you will have to assign to an ET position or to a button. Then you can set it to either toggle or a push type of action.
Looks like you set this to ET4, replacing the steering travel function. To set the steering travel back to the ET4, go to OP->INPUT->SETUP->E4 and press enter. Then scroll and assign the S:TRAVEL to this ET. With your current setting, you have S.RATE set to ET4.
Thanks!
#1664
I just bought a ko propo ex-10 eurus with the 411 fhss receiver and 904 module, how does the antenna work on these? Do I need to keep it full length and no sharp bends or does it not matter much like most 2.4 systems?
#1665
Also does anyone know the max battery dimensions? Can't seem to find it.