20c VS. 25C
#1
Heya, I've got a choice of two batteries for my Tamiya Mini and TT-01. The Mini is running a silver can, and the TT-01 a black can motor. Pretty basic stuff.
What I'm wondering is if it would any difference at all, given the relatively low draw of these motors, if I were to use either a lipo with a 20c rating vs. a 25c rating.
I can't see it making a difference, but I don't know batteries all that well.
Thoughts?
Jim
What I'm wondering is if it would any difference at all, given the relatively low draw of these motors, if I were to use either a lipo with a 20c rating vs. a 25c rating.
I can't see it making a difference, but I don't know batteries all that well.
Thoughts?
Jim
#3
I used to think the same thing until this past weekend. We were running back to back practice using a 27t brushed motor and a 20C Orion followed by a 35C IB. Both are in great condition and both weigh the same. The 35C was consistently faster every run.
So.. given the choice, I would go for the higher C rating.
Jerome
So.. given the choice, I would go for the higher C rating.
Jerome

#5
I will have to have a look at that article.
When I'm referring to silver can, I mean Johnson/Mabuchi 540 motors. 27t, sealed end bell, cheap as cheap can get.
By black can I mean, Mabuchi 540 "Sport Tuned". 23t, sealed end bell, almost as cheap.
With the silver can I'm either running a stock Tamiya TEU101BK or Novak GTX speed control.
With the black can I'm running a stock Tamiya speedy.
Since lipos provide pretty much equal voltage for a given number of cells, I don't think voltage is as much of a player as it is with NiMH.
Jim
When I'm referring to silver can, I mean Johnson/Mabuchi 540 motors. 27t, sealed end bell, cheap as cheap can get.
By black can I mean, Mabuchi 540 "Sport Tuned". 23t, sealed end bell, almost as cheap.
With the silver can I'm either running a stock Tamiya TEU101BK or Novak GTX speed control.
With the black can I'm running a stock Tamiya speedy.
Since lipos provide pretty much equal voltage for a given number of cells, I don't think voltage is as much of a player as it is with NiMH.
Jim




