R/C Tech Forums - Tekin RS PRO

Page 2 of 2

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Tekin RS PRO (https://www.rctech.net/forum/radio-electronics/293250-tekin-rs-pro.html)

flame56mx

08-13-2009 06:28 PM

No, not unless you will run smaller turn motors in the future (5t and less), there is no performance gain.

AreCee

08-14-2009 06:08 AM

Quote:

Originally Posted by callender89 (Post 6201992)

Quick question, is it worth it to shell out the extra $$ for the rs "pro"? i will be running 17.5 or 13.5 in an SC10.

The only reason you would NEED a PRO is if you plan to race modified class using 5T motors or less. The regular RS is MORE than enough for your needs.

riene5

09-20-2009 11:19 PM

I know they act as a heat sink, but does any one run some heat shrink around at least on of the battery posts?

If one of your battery wires came loose off the speed control and accidently came in contact with the other, this could be the end of a lipo for you.

I know I should learn to solder better (I'm getting there), but this could be a cheap form of insurance.

BTW, if I'm running 17.5, surely some heat shrink around one post (and only where the wire is solered on) shouldn't harm the ESC too much?

All times are GMT -7. It is currently 02:04 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page