Bought a new mamba off the forum here and it will not enter programming mode. Ive tried a new rx, battery, motor, tx not sure what else to do. followed the manuel prefectly, unplug turnoff hold throttle turn on nothing, what suspicous is that if i then let go of the throttle the esc beeps and the car works. i can hold the throttle for what seems like forever and it will wait for me to let off then work. whats going on?

hit up the castle creations thread up top (onroad forum for manufacturers). lotta info there in addition to the castle guys waitin to help

R

No telling what version firmwater is on your esc - get Castle Link and install the prgm on a PC and then update the Mamba. I have 6 25s and with all but 1st one, I updated them first, then calibration was nothing. The one I tried to calibrate 1st - same deal you're having, trouble.

These escs seem to be easy to put into progtramming mode without realizing it too and thats usually whats going on when you get no repsonse - you're in prgm mode. Link and PC eliminates all the confusion and trouble.