The v3 software is mind blowing. Amazingly cool and makes my 10.5 run like an 8.5 crazy power too much to handle on a small tight track.

Could I get a link to the xerun 60a 2.1? I want to show it to a friend .

This is from the Hobbywing web-page:
http://www.hobbywing.com/english/Art...?ArticleID=455

So this is the version 2.1? How do you order it?

do I need a lcd programbox for every esc?

I have now 2 speedo's . one runs mod software and the other stock software..
I guess I need 2 programboxes now? right?

No the Program box will read the version of firmware that is flashed and only allow you to adjust the available options of the firmware. I have 1 program box for all mine, stock and mod :D

If you are USA order here

http://www.hobbypartz.com/07e-c-xerun-60a-sd.html

The picture is the older 2.0 but they are shipping 2.1 (I just ordered 4)

Just seen this video shared in the 22 thread.. xerun 60a and 10.5 motor
I can tell you that my RT5 with a tekin 13.5 is doing the same thing :lol:

You can adjust the delay of the turbo kick in on the program box or pc. Default was .4 sec that you can see in the video. I moved mine to no delay.. Instant Tire removal


http://www.youtube.com/watch?v=Tg-W7MMUAmY

Does the program box come with it?If not whats the link to that.I really appreciate all the help!!!

wondering
 

Hello, i want to replace my lrp esc and i am looking at this or the orion vortex r10 speedo which will go in my b4.1 with a 10.5 moter. Has anybody had one burn up without doing something wrong and how smooth are these? also wat should i buy xerun 60 or 120 amp please get back to me.

If you bought just the esc and not the motor combo that shows it with the lcd box it will come with the standard program box that allows you to only adjust the basic settings. You can purchase the lcd box for 17 bucks........

From what I have read is you will see no performance increase from a 60a to a 120a with a 21.5-10.5 motor.
The 120a should only be needed for 8.5 and below or 550 can motors (4x4 SC) :D
I have a 60a and a 8.5 motor in my 2wd buggy and have absolutely no issues it screams!! Remember the amp rating is the continuous output not the peak amps :)

Here is a link to the programing box
http://www.hobbypartz.com/hobbywing-...ogram-box.html

Here is a link to the xerun 60a

http://www.hobbypartz.com/07e-c-xerun-60a-sd.html

Here is a link to the xerun 120a

http://www.hobbypartz.com/07e-c-xerun-120a-sd.html

Here is link to the newest firmware for the box and ESC's
http://www.hobbywing.com/english/Art...?ArticleID=463


Use the Code GENS10 and you get a extra 10% off :)

This installer contains the Spec Stock, Turbo Stock and Mod firmware. If you need help please feel free to PM me and I would be glad to help :)
Just a reminder the pics on Hobby Partz website are the older model xerun (its still upgradeable) but I have always received the new blue xerun 2.1 model
Also the program box will allow you to change the options that are available on the firmware you install. So if you are running the Turbo stock firmware you can adjust RPM boost, Turbo delay, Turbo Boost etc etc all on the programming box. If you are running a Mod firmware that has reduced options than the program box just skips that step. Its really very cool.

smooth compared to lrp?

I would say very smooth, not as smooth as my LRP no. Smoother than my Mamba Max Pro was yes! Its runs sensored motors very well.

Not trying to sound like a Fan Boy but for the money you will not go back. Its a very nice controller for 52 bucks!
They make this same controller for Speed Passion