Hey guys, just got a Sidewinder 5700kv ESC/Motor setup. However, I cant seem to get it setup. I have a Spektrum DX2 and a Spektrum SR3000RX. When I hold throttle and turn on the ESC it blinks green, and then makes noises, and starts blinking red. I go to full brake and it just keeps blinking red and never goes to yellow for neutral setup. Any ideas? ESC plugged into Throttle on RX, dean's to battery and white/white, red/red, and black/black for motor to ESC. Help please

Got it to setup, not sure why but on my Spektrum DX2 I had to increase my throttle/brake range from 100 -> 120 in order for it to setup properly. I got it to setup properly now, adjusting the tuning now.

sounds like you need to relearn that remote to the esc...i had a similar problem

Most likely you need to turn up the brake on your controller, the setting isn't high enough for the esc to recognize it's being applied.