R/C Tech Forums - FlySky Noble NB4

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - FlySky Noble NB4 (https://www.rctech.net/forum/radio-electronics/1042635-flysky-noble-nb4.html)

Quote:

Originally Posted by MrOflam (Post 15477760)

Are they quick on processing the orders? I asked them if they can print custom images for skins (I have a couple drawn up I would like) but 24 hours later, no response.

If I never hear anything, I may just break down and buy one of the pre-made ones.

They shipped my order for a screw set in one day a few months ago. I don't know about communication as I'e never had to message them.

so i should prob note down my settings for all vehicle slots before I do this update?

Yep. It resets all settings.

Quote:

Originally Posted by MrOflam (Post 15477254)

How many volts was the battery you think might have fried it?

The cheapest place I have found to buy them us at hobby king. FYI, if you need to get more.

the battery mentioned is the one I used, 7.4volts ...

so I don't know why it wouldn't work ..

Quote:

Originally Posted by Stealthwave888 (Post 15478132)

the battery mentioned is the one I used, 7.4volts ...

so I don't know why it wouldn't work ..

Was the battery plug inserted the correct way? Positive and negative correct on receiver? That's the only thing that comes to mind , or receiver just failed.

Quote:

Originally Posted by speedworks (Post 15478188)

Was the battery plug inserted the correct way? Positive and negative correct on receiver? That's the only thing that comes to mind , or receiver just failed.

Or maybe he was using a voltage sensor, like frewster when he fried one?

Or maybe he just got a junk receiver. I have 6 FGr4S receivers, havent had a single issue with any of them, but it happens.

Quote:

Originally Posted by MrOflam (Post 15478190)

Or maybe he was using a voltage sensor, like frewster when he fried one?

Or maybe he just got a junk receiver. I have 6 FGr4S receivers, havent had a single issue with any of them, but it happens.

Yep could very well be just a bad receiver..

Im looking to pickup one of these radios in a few months. looking forward to testing this out vs my dx5r.

Interesting news. I talked to FlySky and told them the numbers on the voltage regulator ICs that are in the sensors I was using and they *are* the updated ones that use 8.4V max voltage regulators. I've asked them what could possibly lead to my FGr4 receivers disconnecting from my transmitter and until then I will solely be using FGr4s receivers as I haven't had any issues with those.

Need Help,
I just received My Noble NP4. I'm using it for my crawlers. My question is how do I setup channel 3 for a light switch and channel 4 for my servo winch?

Also SW2 is printed on both side next to the wheel. Manual shows SW2 on one side and SW3 on the other. Is this an error?

https://cimg5.ibsrv.net/gimg/www.rct...452ae8c9b1.jpg

What I used for the flysky nb4 noble mini receiver ..

Quote:

Originally Posted by Fabulous (Post 15478533)

SW2 is left of the wheel and SW3 is right of the wheel. The font is a little strange but it's there on mine.

Still no changelog but my radio worked great for both cars at the track this weekend. I am running the new firmware and updated my FGr4 and FGr4s receivers. Zero issues of any sort. Perhaps I just needed to update the firmware on my FGr4 to match the TX?

Mailman showed up with a Noble on the door today.. Never seen one in real life before i bought it, but the few reviews i`ve seen looked promising.
Havent had a car radio for a while, last one was a Futaba 4pk.

Very impressed so far. Love the display, and the battery solution even more. Everything feels solid and high end.
I did put in a double sided tape under the display, to lock the steering wheel slide thingy though, i dont care for it to be movable.

Oh, and it can be used directly agaist my win10 computer for VRCpro simulator, by only using USB cable and enable «noble emulator» in the system usb menu, no need for a dongle.

Thumbs up!

Quote:

Originally Posted by Ola (Post 15480358)

Interesting that you felt the need to secure the moving arm so it doesnt move. Mine is very stiff, and doesnt seem to move unintentionally at all while in use. Is yours moving freely?

I dont know what the deal is, but I cant get either of mine to work on my pc as a controller. I think its a USB driver thing.

I have had a good amount of time using the radio in direct sunlight now, and I have to say, I dont think the display in sunlight concern is an issue. Seems bright enough, and once things are dialed in, Im not really looking at it that much anyway. So, time spent modeling a sun shield, wasted? Yeah probably, far from the only thing I have wasted time on. lol

What version of Windows are you using? It works for me on Windows 10. You just have to set it to Noble emulator in the USB settings on the TX before plugging it in.