![]() |
I have a small update on the SMD SRX2 (And I'd presume others using this case as I highly doubt they are different inside)
I've had cases of the car loosing connection to the transmitter (Exzes X) and running away at two tracks. Both of these have metal link fencing in close proximity to the track (i.e 2 ish car withs from the edge) Unfortunaly I do not own a genuine Sanwa internal antena reciver to compare to but I think it might be a limit of the internal antena recivers in general rather than these specific ones and the cars have worked fine with a pair of Sanwa recivers with wire antenas |
Originally Posted by AW106
(Post 15448468)
I have a small update on the SMD SRX2 (And I'd presume others using this case as I highly doubt they are different inside)
I've had cases of the car loosing connection to the transmitter (Exzes X) and running away at two tracks. Both of these have metal link fencing in close proximity to the track (i.e 2 ish car withs from the edge) Unfortunaly I do not own a genuine Sanwa internal antena reciver to compare to but I think it might be a limit of the internal antena recivers in general rather than these specific ones and the cars have worked fine with a pair of Sanwa recivers with wire antenas Post a pic. |
Originally Posted by 1/8 IC Fan
(Post 15448491)
How is your receiver mounted?
Post a pic. (Will update with Image once I'm back home. For now this is close to how mine is https://cimg4.ibsrv.net/gimg/www.rct...fb550c4a08.jpg |
Sanwa compatible receiver can also be found on Amazon.
|
Please, help needed !
I cannot bind my M17 transmitter with my RX491 receiver. I'm following the procedure : led of the receiver is rapidly flashing when it is connected with the transmitter on bind mode selection, but even after 5 minutes, the light of the receiver never get glows and bind is not done. I tried several time but still the same.. Receiver connection : CH1 : steering CH2 : ESC SSL : bing plug Transmitter selection : RF Mode : FH5 Response mode : SHR (with a SRT BH9027 servo) Is there something I have missed or doing wrong ? Thank you for your help. |
Originally Posted by mvert
(Post 15451217)
Please, help needed !
I cannot bind my M17 transmitter with my RX491 receiver. I'm following the procedure : led of the receiver is rapidly flashing when it is connected with the transmitter on bind mode selection, but even after 5 minutes, the light of the receiver never get glows and bind is not done. I tried several time but still the same.. Receiver connection : CH1 : steering CH2 : ESC SSL : bing plug Transmitter selection : RF Mode : FH5 Response mode : SHR (with a SRT BH9027 servo) Is there something I have missed or doing wrong ? Thank you for your help. This is the thread for non Sanwa branded (Sanwa Compatible) receivers. Thank you |
Just got the Hobbystar 482R (antenna-less) it is working perfect so far. I have the Hobbystar 471 in my buggy and I haven’t had any issues with it after a couple months of racing. |
|
powerstar RS472E L shape receiver
been running this reciever on my touring club racing and also in my 12th scale used it in a big event on a big track so far no issues similar speed and feel with my sanwa receiver just got my third one from HK showed up in a week thats service
|
Add Muchmore to the list. Works great on the bench. Was easy to bind and will be track tested in on road this weekend. https://cimg3.ibsrv.net/gimg/www.rct...72a95018c.jpeg |
Powerstar flawless so far
|
Originally Posted by STLNLST
(Post 15467277)
Add Muchmore to the list. Works great on the bench. Was easy to bind and will be track tested in on road this weekend. https://cimg3.ibsrv.net/gimg/www.rct...72a95018c.jpeg where did u buy the muchmore receiver at? |
Originally Posted by savage24x
(Post 15461498)
Bought one of these. We’ll see what happens! |
Where did u order from ? I can’t seem to find them online |
Originally Posted by yodace
(Post 15471933)
Where did u order from ? I can’t seem to find them online |
| All times are GMT -7. It is currently 08:00 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.