R/C Tech Forums - Sanwa-compatible receiver thread

Page 24 of 24

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Sanwa-compatible receiver thread (https://www.rctech.net/forum/radio-electronics/1034379-sanwa-compatible-receiver-thread.html)

choisan

11-25-2023 06:10 PM

My version 2 492 clone is not having bec issue so far.
but i will buy the sanwa latest version instead if i buy again
https://sanwa-denshi.co.jp/rc/car/receiver/rx-49t.html
https://cimg2.ibsrv.net/gimg/www.rct...b8c6c35d94.jpg

Sanchez

11-26-2023 04:29 PM

Quote:

Originally Posted by gigaplex (Post 16052884)

My Dasmikro 492 v2 clone arrived today. It has the same issue as the previous one, radio brownouts on my car with a weak BEC. My genuine Sanwa FH5 receivers as well as my 482 clones all handle the same test just fine.

I had a similar issue with my v2 clone and a Savox servo (power hungry and known for brownouts). Adding a cap into the receiver fixed this issue for me.

platgof

12-10-2023 06:21 AM

Quote:

Originally Posted by jabroni racing (Post 16040755)

i have 3 of these off amazon, NO issues.. ARX-482R 4CH FHSS

https://www.amazon.com/ARX-482R-Inte..._0_1_ec_i&th=1

why does it say futaba

platgof

12-19-2023 11:37 AM

I picked up a Das Mikro rx and it works great on FH3. Had a problem with DH4 and could care less. I bought two RX-472 that would not bind, and at least this one does. I will not buy another new or used RX-472 when I know this one will work. Plan on buying at least one more. I checked the range and it is fine, over 200 feet. I had a rough week having two rxs fail and a soldering iron, but all is good now as I replaced them.

TheSilverSpider

09-08-2024 07:10 PM

Quote:

Originally Posted by Xtracrispy (Post 15883769)

I just received two AGF ARX-482R that I ordered from Banggood, came in under $50 and both the packaging and the units are very nice.

I have the das mikro ones as well, and the AGF is much better build quality.

A very nice bonus feature is that this receiver actually supports SSL telemetry for my Sanwa ESC when plugged into the BATT port.
This is not mentioned in the instructions or marketing materials explicitly, but worked when I tried it just now.
Motor temps and RPM are coming in crystal clear, I haven't tried ESC settings yet though.

was you able to to do telementry with all the ESC settings as well after testing further?

endy0430

02-09-2025 02:14 AM

1/10 scale on road

What’s the best receiver for on road touring car fwd club racing to pair with the M17

Roelof

02-09-2025 04:05 AM

Quote:

Originally Posted by endy0430 (Post 16164385)

What’s the best receiver for on road touring car fwd club racing to pair with the M17

The one that works with the M17?

All times are GMT -7. It is currently 01:08 PM.

Page 24 of 24

« First

Show 40 post(s) from this thread on one page