|
Originally Posted by the rc guy
(Post 15273288)
do you run a esc bec or a ubec. whats its voltage and are the rx plug for it ok?
|
I think you got it wet somehow, or wiring. These are very good rx's. The only problem I had was when I caked it in mud, that was bad. But I kept blowing the mud and water out and it came back to life.
|
Take it apart and look closely inside for anything unusual.
|
I'll have a look inside jc3.
it had issues from brand new, not a chance it's ever gotten wet since I've had it. Wires were all done by a RC shop. |
Could just be a bad receiver. Maybe the internal antenna is bad or disconnected. Does anyone at your track have a spare you can try? |
I have a spare that I've tried. Went out today with 2 cars, 2 recievers and could not drive out of a 15m radius without losing signal. All I can think now is my transmittter.
|
I'm running a sanwa mt4 for the record .
|
Originally Posted by Nicko451
(Post 15275582)
I'm running a sanwa mt4 for the record .
|
I've not heard of low power option. Got a friend sending me his transmitter to test.
|
In Europe for DSSS systems there is a law that it may not transmit with more than 10mW power while in the US it is 100mW. I believe with FHSS it is on both continents 100mW
|
| All times are GMT -7. It is currently 12:23 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.