Sanwa Pro Gen 2 Vortex
#1
Sanwa Pro Gen 2 Vortex
Got this on order, and also ordered the program box. I will be comparing it to the industry std RSX. I expect a lot out of it, using it with my M12S radio.
#2
Tech Elite
iTrader: (61)
With the M12S (or the other Sanwa SSL Tx), you don't/won't need the program box - at all.
Remember to plug the ESC into the battery slot in the Rx - not channel 2. The default settings will be shown in the manual. The top four settings are set via the button on the switch, but for racing the defaults are fine. Just go straight into the Tx and start setting it up. First thing is to go into the bind menu and rebind with Throttle in SSR mode. Good luck.
Remember to plug the ESC into the battery slot in the Rx - not channel 2. The default settings will be shown in the manual. The top four settings are set via the button on the switch, but for racing the defaults are fine. Just go straight into the Tx and start setting it up. First thing is to go into the bind menu and rebind with Throttle in SSR mode. Good luck.
#4
Both 472 and 482. Darn, I already bought the box. Thanks for the plug in info on channel 2.
#5
Anyone use the "Ram" induction?
#6
Tech Regular
Thinking of getting this esc myself along with a mt44. Please post your impressions of everything
#7
It might be awhile as it is on a slow boat from China! I got a great deal, so figured I could wait, besides my RSX has arrived, so I am good for awhile till I get my next wheeler.
#8
Tech Regular
Got it. I did find a few people talking about them and nothing but good things. Pretty sure I will get the gen 2 Pro along with a ssl / SSR Servo. So many tuning options and telemetry haha
#9
Yeah, it will be fun to watch the telemetry in action, especially RPM.
#10
I hardly take my eyes off the car. Data logging is one thing, but real time telemetry is kinda useless.
#11
Tech Regular
#13
I was thinking that running telemetry might slow the radios signal time, so it will probably not be used. During practice it could be fun to play with.
#14
Tech Regular
Also the RX-482 should have everything you need and comes with the MT44
https://www.manualslib.com/manual/12...page=23#manual
Last edited by buggybattle; 12-27-2017 at 02:11 AM. Reason: Adding link
#15
Tech Regular
I don't think it does. Did you happen to read that somewhere ? I will be data logging when I start racing again for sure. My hope is the data will help me get up to speed quicker. If it turns out to be useless then oh well lol