Community
Wiki Posts
Search

Discharging 2S

Thread Tools
 
Search this Thread
 
Old 12-06-2017 | 05:08 AM
  #1  
Thread Starter
Tech Adept
 
Joined: Aug 2014
Posts: 103
Default Discharging 2S

Hello all,

Very few racers at my local track discharge in the pits however, a bunch discharge/condition there batteries at home.

Is there an advantage to discharging every race or would every couple of race days be just as beneficial?

Thank you
Rcracing01 is offline  
Old 12-06-2017 | 05:14 AM
  #2  
gigaplex's Avatar
Tech Champion
iTrader: (2)
 
Joined: Dec 2015
Posts: 7,766
From: Melbourne, VIC
Default

Originally Posted by Rcracing01
Hello all,

Very few racers at my local track discharge in the pits however, a bunch discharge/condition there batteries at home.

Is there an advantage to discharging every race or would every couple of race days be just as beneficial?

Thank you
Some people cycle their packs (full charge and discharge cycle) at high currents to intentionally warm them up before a race to lower the IR. It reduces the lifespan of the batteries though. There's not much point discharging at a low rate every race. I never bother with a full discharge cycle, I just storage mode them at the end of the day.
gigaplex is offline  
Old 12-06-2017 | 05:44 AM
  #3  
Thread Starter
Tech Adept
 
Joined: Aug 2014
Posts: 103
Default

Originally Posted by gigaplex
Some people cycle their packs (full charge and discharge cycle) at high currents to intentionally warm them up before a race to lower the IR. It reduces the lifespan of the batteries though. There's not much point discharging at a low rate every race. I never bother with a full discharge cycle, I just storage mode them at the end of the day.
Even when they are discharging every race it is at 40amps
Rcracing01 is offline  
Old 12-06-2017 | 11:26 AM
  #4  
Tech Champion
iTrader: (17)
 
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
Default

Originally Posted by Rcracing01
Even when they are discharging every race it is at 40amps
It is the "RACER" spec of way to discharge @ 40A and charge them @ 40A to PEAK the battery performance at its best. Also, the battery need to be use/run within minutes after charged, otherwise, there is no benefit of doing so.

I can't really bother to do that type of "cycle" as that 0.1s faster is not going to get me to A-main.............even though I have the charger/discharge bank to do so.

But it is something new to learn.....
Solara is offline  
Old 12-06-2017 | 01:07 PM
  #5  
Tech Apprentice
iTrader: (1)
 
Joined: Dec 2015
Posts: 74
Default

With lipo there really isn't anything to condition. Discharging or charging at a high amp rate only helps by slightly heating the battery. A warmer battery has less internal resistance. Once the battery cools back down any advantage is lost. You could achieve the same thing by taking the battery and warming it up in your hands or an inner coat pocket but the advantage is minimal.
jkaetz is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.