2008 SEDAN CHALLENGE @ THE COLISEUM AUGUST 1RST-3RD
#16
Tech Master
iTrader: (6)
Hey guys,
We haven't made this certain yet but so far we have these.
Classes are as follows:
Stock Sedan-roar approved 27t, roar approved 17.5 based motors; 4600 NiMH limit, roar approved 7.4v lipos allowed
19t/10.5 Sedan-roar approved 19t, roar approved 10.5 based motors;4600 NiMH limit, roar approved 7.4v lipos allowed
Super Stock-roar approved 13.5 based motors (brushless only); 4600 NiMH limit, roar approved 7.4v lipos allowed
Casey
We haven't made this certain yet but so far we have these.
Classes are as follows:
Stock Sedan-roar approved 27t, roar approved 17.5 based motors; 4600 NiMH limit, roar approved 7.4v lipos allowed
19t/10.5 Sedan-roar approved 19t, roar approved 10.5 based motors;4600 NiMH limit, roar approved 7.4v lipos allowed
Super Stock-roar approved 13.5 based motors (brushless only); 4600 NiMH limit, roar approved 7.4v lipos allowed
Casey
The next thing I can find and fit my car(s) and wiring is Orion 4800 or Trakpower 4900. I believe 4 months from now we may have a hard time to find anything below 4600 at a reasonable price if we can find one since people will make only the high capacity. The rest may not be ROAR approved packs.
If 2 of my 3600 dies before the race in August I will be in the scramble mode try to find the pack that fit and capacity that will meets the limit.
SMC has 4000 on the shelf but the wiring came out the wrong side of the pack. I don’t know about the others I will have a heck of the time re wiring my car every time I put the pack from difference manufacturers or matchers on the car 2 or 3 times a day
I wish they standardized the hard case just like they do on AA cells so I can just buy it off of the shelf regardless of what brand it is.
Beside limiting the Li-Po capacity probably won’t make any different whether 3600 or 4600 pack. If you want to gear your motor to 350 degrees just cuz you have 5000 pack, be my guest.
I ran 13.5 last week at the C I’m only missing about 1800mah after 5 min race and I hit stuffs during the run. It's a myth, size doesn't matter
Just my 2 pennies.
#20
From Scooter at Tekin:
Talking with Jim we are not going to be doing anything for a little bit
especially after finding some of the door prizes we have furnished on E-bay
for a really stupid low price.
Unfortunately he sent this email to me after he said that they WOULD help us out. Take it for what its worth everyone.
Talking with Jim we are not going to be doing anything for a little bit
especially after finding some of the door prizes we have furnished on E-bay
for a really stupid low price.
Unfortunately he sent this email to me after he said that they WOULD help us out. Take it for what its worth everyone.
#22
Tech Master
I'm in for stock or 13.5 sedan not sure which one yet.
#24
Hey guys,
We haven't made this certain yet but so far we have these.
Classes are as follows:
Stock Sedan-roar approved 27t, roar approved 17.5 based motors; 4600 NiMH limit, roar approved 7.4v lipos allowed
19t/10.5 Sedan-roar approved 19t, roar approved 10.5 based motors;4600 NiMH limit, roar approved 7.4v lipos allowed
Super Stock-roar approved 13.5 based motors (brushless only); 4600 NiMH limit, roar approved 7.4v lipos allowed
1/12 Scale GTP Stock-see above stock motors and batteries
1/12 Scale GTP 19t/10.5-see above 19t/10.5 motors and batteries
Trans am-link to national rules http://www.usvintagetransam.com/
1/18th Scale Stock Sedan-losi motor losa1089 5 cell limit (this is the motor I have heard everybody runs in stock if it is wrong please let me know)
1/18th Scale Mod-any brushed or brushless motor 5 cell limit (again let me know)
These are still tentative classes.
Thanks,
Casey
We haven't made this certain yet but so far we have these.
Classes are as follows:
Stock Sedan-roar approved 27t, roar approved 17.5 based motors; 4600 NiMH limit, roar approved 7.4v lipos allowed
19t/10.5 Sedan-roar approved 19t, roar approved 10.5 based motors;4600 NiMH limit, roar approved 7.4v lipos allowed
Super Stock-roar approved 13.5 based motors (brushless only); 4600 NiMH limit, roar approved 7.4v lipos allowed
1/12 Scale GTP Stock-see above stock motors and batteries
1/12 Scale GTP 19t/10.5-see above 19t/10.5 motors and batteries
Trans am-link to national rules http://www.usvintagetransam.com/
1/18th Scale Stock Sedan-losi motor losa1089 5 cell limit (this is the motor I have heard everybody runs in stock if it is wrong please let me know)
1/18th Scale Mod-any brushed or brushless motor 5 cell limit (again let me know)
These are still tentative classes.
Thanks,
Casey
for mod its straight open runwhatcha brung
#26
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
Ken, best of luck in the future...... Maybe someday you'll return....
#28
Tech Addict
iTrader: (8)
I guess I can keep the tc for a little bit longer. I have a few questions though
1. Since Jaco is a sponsor, will there be discounts on their tires for this event?
2. What is the deadline for entries, and do they need to be paid online, in-person, or either?
3. ROAR only approved sensored brushless motors right? Is there any specs as to what brushless esc can be used?
Thanks!
1. Since Jaco is a sponsor, will there be discounts on their tires for this event?
2. What is the deadline for entries, and do they need to be paid online, in-person, or either?
3. ROAR only approved sensored brushless motors right? Is there any specs as to what brushless esc can be used?
Thanks!
#29
Tech Master
iTrader: (11)
Hey Ben good to see you're still around.
To answer your questions.
1. We are still working on the tires for this race. If (and that is an if) we make this a controlled tire race I will try to work something out with that company to get a better price on the tires.
2. You can pay anytime up until the day of the race. If you plan to practice on Friday we will waive the practice fee if you pay that day (Friday). You must pay on Friday in order for this to apply.
3.Yes. Only ROAR approved brushless motors will be allowed allowed. There is no tech on the esc.
Hope to see you soon.
Casey
To answer your questions.
1. We are still working on the tires for this race. If (and that is an if) we make this a controlled tire race I will try to work something out with that company to get a better price on the tires.
2. You can pay anytime up until the day of the race. If you plan to practice on Friday we will waive the practice fee if you pay that day (Friday). You must pay on Friday in order for this to apply.
3.Yes. Only ROAR approved brushless motors will be allowed allowed. There is no tech on the esc.
Hope to see you soon.
Casey
#30
Tech Addict
iTrader: (8)
Hey Ben good to see you're still around.
To answer your questions.
1. We are still working on the tires for this race. If (and that is an if) we make this a controlled tire race I will try to work something out with that company to get a better price on the tires.
2. You can pay anytime up until the day of the race. If you plan to practice on Friday we will waive the practice fee if you pay that day (Friday). You must pay on Friday in order for this to apply.
3.Yes. Only ROAR approved brushless motors will be allowed allowed. There is no tech on the esc.
Hope to see you soon.
Casey
To answer your questions.
1. We are still working on the tires for this race. If (and that is an if) we make this a controlled tire race I will try to work something out with that company to get a better price on the tires.
2. You can pay anytime up until the day of the race. If you plan to practice on Friday we will waive the practice fee if you pay that day (Friday). You must pay on Friday in order for this to apply.
3.Yes. Only ROAR approved brushless motors will be allowed allowed. There is no tech on the esc.
Hope to see you soon.
Casey