***Donate your used B4 - T4 - SC10 - SC10B - 1/10 On-Road
#106
Still looking for
Ball studs
b4 tunbuckles
front top plate
servo mounts
T plate
bearings
Ball studs
b4 tunbuckles
front top plate
servo mounts
T plate
bearings
#107
I'll have another shipment soon with a few of those items.
Blake
Blake
#108
Awesome Blake, those items are pretty much always in need, I've got tons of T4 arms/towers and plenty of hubs F/R but stuff that most don't change out is always a bit harder to come by.
Thank you again for all your support.
Vince
Thank you again for all your support.
Vince
#109
Also looking for the stock Losi 2.4 radios again, or even reg. Spektrum. Could use receivers but I know most people don't upgrade receivers.
Servos also.
Servos also.
#110
Spektrum radios
Servos
Ball Studs
Hinge Pins
Anything for B4/T4/SC20 or Durango DEX210 and now a DESC210 we just added to the stable.
Servos
Ball Studs
Hinge Pins
Anything for B4/T4/SC20 or Durango DEX210 and now a DESC210 we just added to the stable.
#111
#112
Also have a Castle Link with USB plug/cord and a MRT Transponder I can trade for a good ESC or Savox 1258 Servo.
http://www.rctech.net/forum/r-c-item...ansponder.html
http://www.rctech.net/forum/r-c-item...ansponder.html
#113
Still looking for items at the top of the page.
Also a couple of Losi/Spektrum radios
Also a couple of Losi/Spektrum radios
#114
#115
Looking for some sensor wires for SC and buggy 180mm +
and of course
Ball studs
b4 turnbuckles
front top plate
servo mounts
T plate
bearings
Losi/Spektrum radios
and of course
Ball studs
b4 turnbuckles
front top plate
servo mounts
T plate
bearings
Losi/Spektrum radios
#116
Just listed a DX3R that powers up and binds but only has steering, no throttle. Needs to be sent in for repair.
Will trade it for a good servo like Savox or HiTec or possibly 3 - D770 from HobbyPartz.
Also need
a couple more Spektrum or Losi radios
Sensor wires
servos
Will trade it for a good servo like Savox or HiTec or possibly 3 - D770 from HobbyPartz.
Also need
a couple more Spektrum or Losi radios
Sensor wires
servos
#117
Still need lots of AE parts listed above.
#118
#119
Got another B4 finished last night thanks to zeakemedia.
Need to order some more screws and I think I have another B4/SC10 almost complete.
Thanks again for all the support.
SC10 needs
ft. top deck
rear t-plate
slipper/idler gear/top shaft
screws (will order in bulk)
B4 needs
ft. top deck
rear t-plate
rear arms
slipper/idler gear
f/r shock towers
slipper
Need to order some more screws and I think I have another B4/SC10 almost complete.
Thanks again for all the support.
SC10 needs
ft. top deck
rear t-plate
slipper/idler gear/top shaft
screws (will order in bulk)
B4 needs
ft. top deck
rear t-plate
rear arms
slipper/idler gear
f/r shock towers
slipper
#120