LRP ZR.21X Spec.2 Nitro Competition Engine w/ Screamer-93 1/8 Offroad exhaust system
#1
LRP ZR.21X Spec.2 Nitro Competition Engine w/ Screamer-93 1/8 Offroad exhaust system
LRP ZR.21X Spec.2 Nitro Competition Engine w/ Screamer-93 1/8 Offroad exhaust system, clutch and clutch bell included as well as extra clutch bells, clutch shoes and springs: this engine was only used for 2 practice days and one race, Labor Day Shootout@ SDRC. Only has about 3 gallons through it... $140/shipped
** 1st pic is to show the pipe, the engine is my race engine, the ZZ.21C Spec 2 and is not the engine for sale**
Features
High-Competition 1/8 Buggy and Truggy engine
Highest Quality Materials
State-of the-art components of highest quality
LRP XTEC thermal protected WorksTeam Carburettor 14SV-2 with 6.0 and 7.0mm changeable venturi inserts
Carburettor made from Ergal instead of aluminium for smoother function
Improved cooling and higher efficiency through new cooling fin arrangement
LRP CoolDown cylinder-head Spec.2 with special cut outs for additional weight reduction
XTEC competition crankcase
Rear exhaust
World wide race legal
7+1 Ports
Below engine head designed bed for increased engine cooling, air flow and escape
Specifications
RPM max. 35.900
Cubic capacity .21 (3.49ccm)
Power 2.78HP
Class 1/8 Offroad
** 1st pic is to show the pipe, the engine is my race engine, the ZZ.21C Spec 2 and is not the engine for sale**
Features
High-Competition 1/8 Buggy and Truggy engine
Highest Quality Materials
State-of the-art components of highest quality
LRP XTEC thermal protected WorksTeam Carburettor 14SV-2 with 6.0 and 7.0mm changeable venturi inserts
Carburettor made from Ergal instead of aluminium for smoother function
Improved cooling and higher efficiency through new cooling fin arrangement
LRP CoolDown cylinder-head Spec.2 with special cut outs for additional weight reduction
XTEC competition crankcase
Rear exhaust
World wide race legal
7+1 Ports
Below engine head designed bed for increased engine cooling, air flow and escape
Specifications
RPM max. 35.900
Cubic capacity .21 (3.49ccm)
Power 2.78HP
Class 1/8 Offroad
Last edited by flyinhawaiianRC; 01-09-2017 at 07:06 PM.
#7
ran on super high traction and packed track, chassis lasted 3 days! So yes, it did take a beating. But still runs strong and well worth the $160...but no worries. It is going to ebay, I don't get nickel and dimed to death.
Pipe had been cleaned since also.
Pipe had been cleaned since also.
#14
Still have it?