ELECTRONICS orion R10 tekin 6.5 lipos 2S
02-28-2015, 08:39 AM
#1
ELECTRONICS orion R10 tekin 6.5 lipos 2S
Hi guys,
Selling my 1/10 scale stuff. See below:
1) Peak Power 2S 5500 90C saddle pack (roughly 10-12 uses) $65
2) Orion 1S 5500 90C (same...roughly a dozen uses) $30
3) Venom 2S 5300 70C (somewhere under 20 uses) $70
4) Venom 2S 5000 60C (somewhere under 20 uses) $60
5) NanoTech 5000 saddle (between 20-30 uses) $35
6) SOLD Tekin Gen2 6.5t motor (approx 20 uses) $65
7) SOLD Orion R10 PRO ESC $135 (this has around 40 runs on it and has some cosmetic damage...the on/off switch cover is gone (a lot will cut that off anyway) and the capacity wire had to be soldered on pretty close to the case...hence the tape...some might want to replace this...I wouldn't))
These prices are of course shipped anywhere in the lower 48 states. Please let me know if you have any questions and/or comments.
Also...I'll be out a good bit today...feel free to text me at 703-203-6373.
Best wishes,
Scott
Selling my 1/10 scale stuff. See below:
1) Peak Power 2S 5500 90C saddle pack (roughly 10-12 uses) $65
2) Orion 1S 5500 90C (same...roughly a dozen uses) $30
3) Venom 2S 5300 70C (somewhere under 20 uses) $70
4) Venom 2S 5000 60C (somewhere under 20 uses) $60
5) NanoTech 5000 saddle (between 20-30 uses) $35
6) SOLD Tekin Gen2 6.5t motor (approx 20 uses) $65
7) SOLD Orion R10 PRO ESC $135 (this has around 40 runs on it and has some cosmetic damage...the on/off switch cover is gone (a lot will cut that off anyway) and the capacity wire had to be soldered on pretty close to the case...hence the tape...some might want to replace this...I wouldn't))
These prices are of course shipped anywhere in the lower 48 states. Please let me know if you have any questions and/or comments.
Also...I'll be out a good bit today...feel free to text me at 703-203-6373.
Best wishes,
Scott
Last edited by scottreida; 03-04-2015 at 09:45 AM. Reason: sold items update
02-28-2015, 08:48 AM
#2
R10 price
03-01-2015, 10:18 AM
#5
Pm ed
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
