23 HPI Vintage Touring Car Tires/Rims
08-27-2013, 05:15 AM
#1
23 HPI Vintage Touring Car Tires/Rims
23 HPI Vintage Touring Car Tires/Rims for VTA racing, The fronts are 26mm & the rears are 31mm mounted on HPI wheels. Conditions range from new to used. The tire part numbers are HPI4797 and HPI4793 with the exception of one 26mm pair that are HPI102993. All are D-compound.
The first picture shows a set of front and rears mounted on black slotted rims. These are like new with full tread.
The second picture shows the set of 26mm pair that are HPI102993. These are new however they are not VTA legal. They are mounted on black 7 spoke rims. Also pictured is one 26mm front, like new (I cracked the other front rim on the first run and threw it away - that's why there is only one). It's mounted on a silver 5 spoke rim.
The third picture shows a set of front and rears mounted on grey 7 spoke rims. The rears are almost bald and the fronts are bald. The bald tires still work well - in fact some say even better than ones with tread, but may not be legal under USVTA rules.
The 4th picture shows a set of front mounted on black 7 spoke rims and rears mounted on white slotted rims.
The 5th picture shows a set of front mounted on black 5 spoke rims and rears mounted on silver 5 spoke rims. The rears are about 1/4 bald and fronts 1/2 bald.
The last picture shows a set of front and rears mounted on chrome 5 spoke rims. The rears are about 1/2 bald and fronts are bald.
Tire Details:
Available in 26mm and 31mm widths, these tires are specially designed for use with our Vintage wheels and bodies. The tread pattern is a symmetrical design that recreates the popular racing tires from the 60’s, and the outer sidewall has a high profile for maximum realism. Molded with our popular D compound rubber and supplied with single-piece donut inner foams, these tires deliver excellent handling on parking lot surfaces.
Wheel Details:
These wheels offer ultra-realistic stock car looks with an innovative construction technique that replaces the low-profile look of most touring cars with scale tire sidewalls just like you see on super speedways! They are the perfect match for stock car bodies and bolt on to most 1/10th scale touring cars.
The HPI Vintage Tire and Wheel Series is available in 26mm and 31mm widths to fit a variety of body sizes. Choose 26mm for standard sizes (0 degree offset - front), or the 31mm wheels for a wider stance (6 degree offset - rear).
All of the tires are mounted to the rims using super glue and have the original inner donut foams installed.
$100 plus shipping. Feel free to contact me with any questions and thanks for looking!
The first picture shows a set of front and rears mounted on black slotted rims. These are like new with full tread.
The second picture shows the set of 26mm pair that are HPI102993. These are new however they are not VTA legal. They are mounted on black 7 spoke rims. Also pictured is one 26mm front, like new (I cracked the other front rim on the first run and threw it away - that's why there is only one). It's mounted on a silver 5 spoke rim.
The third picture shows a set of front and rears mounted on grey 7 spoke rims. The rears are almost bald and the fronts are bald. The bald tires still work well - in fact some say even better than ones with tread, but may not be legal under USVTA rules.
The 4th picture shows a set of front mounted on black 7 spoke rims and rears mounted on white slotted rims.
The 5th picture shows a set of front mounted on black 5 spoke rims and rears mounted on silver 5 spoke rims. The rears are about 1/4 bald and fronts 1/2 bald.
The last picture shows a set of front and rears mounted on chrome 5 spoke rims. The rears are about 1/2 bald and fronts are bald.
Tire Details:
Available in 26mm and 31mm widths, these tires are specially designed for use with our Vintage wheels and bodies. The tread pattern is a symmetrical design that recreates the popular racing tires from the 60’s, and the outer sidewall has a high profile for maximum realism. Molded with our popular D compound rubber and supplied with single-piece donut inner foams, these tires deliver excellent handling on parking lot surfaces.
Wheel Details:
These wheels offer ultra-realistic stock car looks with an innovative construction technique that replaces the low-profile look of most touring cars with scale tire sidewalls just like you see on super speedways! They are the perfect match for stock car bodies and bolt on to most 1/10th scale touring cars.
The HPI Vintage Tire and Wheel Series is available in 26mm and 31mm widths to fit a variety of body sizes. Choose 26mm for standard sizes (0 degree offset - front), or the 31mm wheels for a wider stance (6 degree offset - rear).
All of the tires are mounted to the rims using super glue and have the original inner donut foams installed.
$100 plus shipping. Feel free to contact me with any questions and thanks for looking!
08-28-2013, 06:26 AM
#2
Seems there is no interest here. These tires have been put on eBay with a starting bid of one penny (and the pictures do work on that site).
http://www.ebay.com/itm/121166189655...84.m1555.l2649
http://www.ebay.com/itm/121166189655...84.m1555.l2649
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
