Dave Ramsey Baby Steps sell out!! RC8BE, Nano Tech 4s, HobbyWing 150a, JR 9100 etc
#1
Dave Ramsey Baby Steps sell out!! RC8BE, Nano Tech 4s, HobbyWing 150a, JR 9100 etc
everything is sold or traded!
Well im not getting out the hobby but im trying to get my finances in order. So im making some small sacrifices for the greater good of my family. FPU!!!!!
Here goes...
Update: because it cant sell I'm open to trades for a sct preferably a traxxas slash platinum.
MORE PICTURES ARE UP and go to page two of this thread.
MAKE OFFERS
-Used RC8BE with a modified(aka raggedy cut job)battery tray to hold longer lipos, comes with:
two sets of used tires (JC Concepts cross hairs and AKA Gridirons),
Additional carbon Fiber shock towers (front and rear but not installed), Used 17t mod 1, BNIB 18t mod 1 pinion, $185 (That is a phenomenal price!)
-BNIB RC SCREWS(cost me $30) part No. rczass032, $25
-One beater body, YOU WILL need a new one!, $ill pay you $5
-Turnigy NanoTech 35c 4s 5000mah lipo $45 (looks brand new and very well taken care of)
-BNIB Tekin sensor wire $5
Well im not getting out the hobby but im trying to get my finances in order. So im making some small sacrifices for the greater good of my family. FPU!!!!!
Here goes...
Update: because it cant sell I'm open to trades for a sct preferably a traxxas slash platinum.
MORE PICTURES ARE UP and go to page two of this thread.
MAKE OFFERS
-Used RC8BE with a modified(aka raggedy cut job)battery tray to hold longer lipos, comes with:
two sets of used tires (JC Concepts cross hairs and AKA Gridirons),
Additional carbon Fiber shock towers (front and rear but not installed), Used 17t mod 1, BNIB 18t mod 1 pinion, $185 (That is a phenomenal price!)
-BNIB RC SCREWS(cost me $30) part No. rczass032, $25
-One beater body, YOU WILL need a new one!, $ill pay you $5
-Turnigy NanoTech 35c 4s 5000mah lipo $45 (looks brand new and very well taken care of)
-BNIB Tekin sensor wire $5
Last edited by richracer2; 09-26-2013 at 07:50 AM. Reason: Sold:Flysky, jigs up, Jr 9100t, car stand, Hobbywing Esc, and motor. Power supply and charger are no longer for sale.
#2
Tech Master
iTrader: (28)
Well im not getting out the hobby but im trying to get my finances in order. So im making some small sacrifices for the greater good of my family. FPU!!!!!
Here goes...
JUST TO SET THE MOOD LOW BALLERS WILL BE IGNORED!!!, NO I DIDNT LOSE MY JOB, JUST TRYING TO SAVE A FEW MONTHS OF BILLS UP
-Used RC8BE with a modified battery try to hold longer lipos, comes with:
two sets of used tires (JC Concepts cross hairs and AKA Gridirons),
Additional carbon Fiber shock towers (front and rear but not installed), Used 17t mod 1, BNIB 18t mod 1 pinion, $200 (That is a phenomenal price!)
-BNIB RC SCREWS(cost m3 $30) part No. rczass032, $25
-One beater body, YOU WILL need a new one!, $ill pay you $5
-Track Star 1900kv sensored/sensorless motor $45
-HobbyWing XERUN 150A Sensored ESC $80
-JR 9100T 400+ oz steering servo $65
-Turnigy NanoTech 35c 4s 5000mah lipo $45 (looks brand new and very well taken care of)
-Dynamite Passport Ultra 150w 7a/5a dis, up to 8s, with power supply $80,
-Dynamite tool set like new with ratcheting drive $20
-Flysky GT3B with two receivers $25
-Car stand from Guitar center $5
-The Jigs Up soldering station (best product ever next to the Losi Mini 8ight hehe) $15
BNIB Tekin sensor wire $5
Total of everything added comes to $610
Buy the lot and its yours for $575 shipped
I dont want to part out yet because i dont want to make 10 trips to the PO
Pics coming soon
Please only offer to buy the whole lot for now. Im super busy with work and school so I dont have a lot of time to address parting out.
Thanks Guys
Rich
Here goes...
JUST TO SET THE MOOD LOW BALLERS WILL BE IGNORED!!!, NO I DIDNT LOSE MY JOB, JUST TRYING TO SAVE A FEW MONTHS OF BILLS UP
-Used RC8BE with a modified battery try to hold longer lipos, comes with:
two sets of used tires (JC Concepts cross hairs and AKA Gridirons),
Additional carbon Fiber shock towers (front and rear but not installed), Used 17t mod 1, BNIB 18t mod 1 pinion, $200 (That is a phenomenal price!)
-BNIB RC SCREWS(cost m3 $30) part No. rczass032, $25
-One beater body, YOU WILL need a new one!, $ill pay you $5
-Track Star 1900kv sensored/sensorless motor $45
-HobbyWing XERUN 150A Sensored ESC $80
-JR 9100T 400+ oz steering servo $65
-Turnigy NanoTech 35c 4s 5000mah lipo $45 (looks brand new and very well taken care of)
-Dynamite Passport Ultra 150w 7a/5a dis, up to 8s, with power supply $80,
-Dynamite tool set like new with ratcheting drive $20
-Flysky GT3B with two receivers $25
-Car stand from Guitar center $5
-The Jigs Up soldering station (best product ever next to the Losi Mini 8ight hehe) $15
BNIB Tekin sensor wire $5
Total of everything added comes to $610
Buy the lot and its yours for $575 shipped
I dont want to part out yet because i dont want to make 10 trips to the PO
Pics coming soon
Please only offer to buy the whole lot for now. Im super busy with work and school so I dont have a lot of time to address parting out.
Thanks Guys
Rich
#3
YESSIR!!!!
I am extremely motivated to make this thing work!
Bump
Power supply and dynamite tools in the pics below are no longer for sale.
I am extremely motivated to make this thing work!
Bump
Power supply and dynamite tools in the pics below are no longer for sale.
Last edited by richracer2; 08-04-2013 at 10:15 AM. Reason: Power supply and dynamite tools in the pics below are no longer for sale.
#5
Dave Ramsey
Hey, I wish you the best!!! I took his class and it was a lot of good information. Always remember the delay of satisfaction is a sign of maturity (hope I remembered that quote correctly).
#6
Thanks Caleb! I'll be sure to let you know. I'll probably only wait till Monday or Tuesday.
Godzukihop thanks! I haven't heard that quote yet. I just have the cd, but it is truly a good feeling to be making headways toward financial peace! I hated to sell this stuff but if I'm serious and get my finances in order I might actually by a brand new 1/8 truggy or buggy in the future instead of used, lol!!!!
Bump
Godzukihop thanks! I haven't heard that quote yet. I just have the cd, but it is truly a good feeling to be making headways toward financial peace! I hated to sell this stuff but if I'm serious and get my finances in order I might actually by a brand new 1/8 truggy or buggy in the future instead of used, lol!!!!
Bump
Last edited by richracer2; 07-28-2013 at 08:00 PM.
#7
If you decide to split up I will purchase the flysky radio.
#9
Bump and I'm about to start posting pics in a second. I'm only posting distance shots of the buggy until I get it cleaned.
Last edited by richracer2; 07-28-2013 at 08:04 PM.
#10
Bump, to save on time that I really don't have I'll let everything go for $540 shipped! That is a very good deal. This will cost me around $50 to ship everything. If it doesn't sell today then I will start parting out tomorrow.
A few pics are up. More coming...
A few pics are up. More coming...
#11
Ill take the radio if the above offer falls and you decide to split up.
#13
Thanks for all the interest guys. I will try my best to get pics of everything else up later tonight or Wednesday. So sorry about the delays..
Rich
I am parting out but I prefer to do package deals on the bigger items.
Rich
I am parting out but I prefer to do package deals on the bigger items.
Last edited by richracer2; 08-01-2013 at 11:03 PM.
#14
Hii may I asking the dynamite passport ultra $70...980-253-4190 my phone
#15
Sorry I can't do $70, remember I have to ship this thing to you. The power supply alone cost me ~$50ish. I didn't include shipping prices in the post so sorry about the confusion. I'd say $90 shipped is the lowest I'd be willing to go. It's basically brand new.
Last edited by richracer2; 08-01-2013 at 11:01 PM.